Marantz PMD910 manual When using a standard TV 43 aspect ratio, TV Type, Progressive, Output Mode

ENGLISH

When using a standard TV (4:3 aspect ratio)

Select 4:3 LB (Letter Box) or 4:3 PS (Pan & Scan) in the TV ASPECT value. Following the chart below, make screen aspect adjustments according to the aspect ratio on the disc you are viewing.

Wide Screen Disc (16:9) Standard Screen Disc (4:3)

Letter Box (4:3 LB)

Screen

No setting required

(Always Standard 4:3 screen )

Pan & Scan (4:3 PS)

Note : Some disc will not allow you to change the aspect ratio.

3.TV TYPE

Set up TV type according to type supported by your TV or monitor. When you select MULTI, the output video type is dependent on the disc loaded. If the recorded video type is NTSC then it outputs NTSC.

Disc Format	Position of TV Type
	MULTI	NTSC
NTSC	NTSC	NTSC
PAL	PAL	NTSC

4.PROGRESSIVE

Set up PROGRESSIVE ON/OFF according to type supported by your TV or monitor. A progressive scan TV is capable of stable, flicker-free images.

Note

•If you connect aTV or monitor, that is not compatible with progressive scan signal and choose “ON” of the progressive scan setting, you will not be able to see any picture at all.

•Push stop button for loner than 5 second to set progressive scan setting into OFF.

5.OUTPUT MODE

If you want to see the picture in S-VIDEO, choose S-VIDEO and connect to the TV set using S-VIDEO cable. Set to YCbCr to view in component video via Y, Cb/Pb, Cr/Pr connect.

Setup Menu / Video			Video Output
Progressive	Output mode	Video Jack	S-Video Jack	Component Jack
OFF	YCbCr	Composite	-	Interlace mode (480i)
ON	YCbCr	-	-	Progressive mode (480p)
OFF	S-Video	Composite	S-Video	-

6.CAPTIONS (NTSC only)

CLOSED CAPTION was invented for hearing impaired person. But it is very useful when learning foreign languages. If your TV supports closed caption, select ON. If not, closed caption won’t be displayed.

34