![](/images/new-backgrounds/1036644/366447x1.webp)
2. SERVICE MODE
2-1. Factory mode
While pressing <OPEN/CLOSE>and<NEXT>plug in the Mains cord.
Press< >
Version of Backend(QF01)
"Ver : X.XX" is displayed
Press< >
Version of Frontend(Q125)
"DrvVer : XX.XX" is displayed
Press< >
All parts of FTD is turned on
Press< >
Each Segment is displayed one by one
Press< >
Check of key
When key is depressed,key name is displayed
Turn off Power to quit Service Mode.
2-2. Reset the unit to the default settings
While pressing <OPEN/CLOSE>and<NEXT>plug in the Mains cord.
Press <PHANTOM-C>
"EEPROM Clear" is displayed
All the setting are restored to the default setting.
2