TONE | KEYPAD |
ENGLISH
treble (^ :up / v : down ) buttons
These buttons are used to adjust the tone of
bass (^ :up / v : down ) buttons
These buttons are used to adjusts the tone of
Source Direct button
This button is used to transmit the signals by bypassing the tone control circuitry. Therefore, the signals can be reproduced with higher quality.
Night Mode button
This button is used to set night mode. This feature reduces the input level of dolby digital sources by 1/3 to 1/4 at their loudest thresholds, preventing the dynamic range or loud sounds without restricting the dynamic range or volume of other sounds or at less than maximum levels.
TUNE
AM ,(LW) ,FM buttons
These buttons are used to switch between FM, AM, and LW mode of the tuner.
LW button is not available in
Seek (^ :up / v : down ) buttons
These buttons are used to change the frequency.
Preset (^ :up / v : down ) buttons
These buttons are used to change the preset station.
Stereo/Mono button
This button is used to select the auto stereo mode or mono mode.
Preset Scan button
This button is used to start a scan automatically through the stations preset into the receiver’s memory.
ten keypad (0,1 - 9)
These buttons are used to change the preset station or input frequency directly.
Memo button
This button is used to enter the tuner’s preset memory numbers and station names.
Clear button
This button is used to cancel certain memory or programming operations.
F/P buttons
This button is to select the display for frequency or preset channel .
PTY button
Selects PTY function in RDS (Radio Data System) by this button. *This button is not available in
Selects display mode function in RDS (Radio Data System) by this button.
*This button is not available in
13
