ENGLISH
2. FUCTION SELECT & SURROUND MODE
V I D E O | : D V D | |
A U D I O | : D V D | |
D I G I T A L | : D I G – 5 | |
S U R R – MO D E : | D T S – C I N E MA | |
L F E L E V E L : | – 1 0 d B | |
|
|
|
When a function or surround mode button is selected:
VIDEO: Displays the current video source. When DSS/TV, LD, DVD, VCR or AUX is selected with the function selector, both AUDIO and VIDEO shows the same name.
AUDIO: Displays the current analog audio input source. DIGITAL: Displays the current digital input source.
AUTO, DOLBY, THX 5.1, THX Sur. EX , DTS CINEMA,
DTS MUSIC, HALL, MATRIX, MOVIE,
STEREO, MONO,
BASIC OPERATION
LISTENING TO THE TUNER
Frequency scan step for AM is selectable. Default is 10 kHz step. If your country’s standard is 9 kHz step, prress “AM” button on the remote more than 6 seconds. Scan step will change.
Note:
• Memory for the tuner will clear by this setup.
MANUAL TUNING
1.To select the tuner as the source, turn the INPUT SELECTOR knob !5on the front panel or press the Tuner button on the remote.
2.Press the BAND button y on the
3.Press the AUTO TUNING button !7on the
4.Turn the GYRO TUNING knob @1on
5.If FM is selected, press the FM MODE button u on the front panel or the Stereo/Mono buttons on page of Tune mode on the remote to select the desired audio mode.
3. MASTER VOLUME CONTROL
MA S T E R V O L U M E
– – – – – – – – – – – – – – – – – – – –
Displayed when the MASTER volume is varied or a button of the remote handset is pressed.
The box display indicates the 0 dB level with a solid box “
”.
AUTO TUNING (USING THE SR-14EX)
Light up the “AUTO TUN” indicator by pressing the AUTO TUNING button !7and turn the GYRO TUNING knob @1.
AUTO TUNING (USING THE REMOTE CONTROL UNIT)
The ^ Seek v button is pressed for more than 1 second to start Auto tuning function.
(FM) MODE Button Operation
When “AUTO” indicator is on in the display, FM stations which broadcast in stereo will be received in stereo and the “STEREO” indicator lights.
When “AUTO” indicator is off, all the FM stations will be received in monaural regardless of whether or not they are broadcasting in stereo.
4. MUTE
MU T E
When the MUTE button is pressed on the remote control, “MUTE” will be shown on screen. Pressing MUTE button again will clear the display, or adjust the volume.
5.SLEEP TIMER
S L E E P T I M E R
O N 9 0 m i n
When the SLEEP button is pressed, the setting on or off and the remaining time of the sleep timer function are displayed.
You can change the mode between on, off and the amount of time to elapse before the unit will shut itself off by cycling the sleep button. 20
PRESET TUNING
With this unit you can preset up to 50 FM/AM stations in any order. For each station, you can memorize the frequency and reception mode if desired.
1.Refer to the “MANUAL TUNING” or “AUTO TUNING” section above to tune in a desired station.
2.Press the MEMO button i. “MEMO” indicator starts blinking on the display. While “MEMO” is still blinking (approx. 5 seconds), select the preset number by turning the GYRO TUNING knob @1, then press the MEMO button again.
3.When a number has been properly input, “MEMO” indicator stops blinking and goes out. The station is now stored in the specified preset memory location.
1.Tune in a desired station.
2.Press the Memo button on page 2/3 at Tuner mode.
3.Enter the desired preset number with ten keypad on page of Keypad mode.
*When entering a single digit number (2, for example), either input “02” or just input “2” and wait for a few seconds.
*If a number other than
