Marantz SR4001 NORMAL MODE, SETTING THE BACK LIGHT, PRESET MODE, PROGRAMMING WITH THE 4-DIGITCODE, SCANNING THE CODE TABLE, CHECKING THE CODE, RESETTING THE CODE

BASIC OPERATION

NORMAL MODE

(When operating Marantz AV equipment products) This remote control is preset with a total of 12 types of remote codes, including Marantz TV (television), DVD, VCR (VCR deck), DSS (satellite broadcasting tuner), TUNER, CD, CD-R, MD, TAPE (tape deck), AUX1, AUX2, and AMP (amplifier).

Learning is not necessary for Marantz products. You can use these products without setting any codes.

1. Press the SOURCE button. For this example, press DVD.

Pressing the SOURCE button once changes the remote control to the settings for the source that was pressed.

To change the amplifier on other source, press the SOURCE button twice (double-click). The code is sent, and then the amplifi er source changes to DVD.

SETTING THE BACK LIGHT

Each time press the buttons, illuminate button 2 seconds.

To turn off back light, press and hold down the SET and OFF button until SEND indicator blinks twice. To turn on it again, press and hold down the SET and ON button until SEND indicator blinks twice.

Initial is back light ON.

PRESET MODE

(When operating non-Marantz AV equipment products)

This remote control is preset with remote control codes from AV equipment by other manufacturers. The preset codes are TV, VCR, DVD and DSS. Settings can be made in one of two ways.

When the preset codes are set, the following codes are contained in the source button of the remote control.

See the attached manufacturer number list for the preset manufacturers, devices, preset numbers, and other settings.

Remote control	Corresponding preset	Device name
source name	code
TV	TV	Television
DVD	DVD	DVD player
VCR	VCR	Video deck
DSS	SATELLITE	Satellite broadcasting
		tuner equipment

Importants:

•Some codes may be not match your equipment.

In this case, you can use LEARN mode to store these codes.

•The preset codes do not cover full functions.

If you need extra function, use LEARN mode to store extra function.

•Wen the batteries are getting weak, the preset procedure is not successful.

PROGRAMMING WITH THE 4-DIGIT CODE

	- PRESET +		- TUNING +			SOURCE	SET	OFF	ON
					1.
						l/
						SLEEP	DISPLAY	P.DIRECT	SURROUND
	DISC+	ANGLE	SUB TITLE	AUDIO
									LIP SYNC/
	CH-SEL	V-OFF	ATT.			AUTO		dts	INPUT
	BASS		TREBLE			1	2	3
1.						CS	EX/ES	VIRTUAL	T.MODE
	TV	DVD	VCR	DSS		4	5	6
					2.
	TUNER	CD	CDR	MD		M-CH ST	STEREO	NIGHT	P.SCAN
	TAPE	AUX1	AUX2	AMP		7	8	9
							7.1CH IN	A/D	HT-EQ
						CL	0	+10	MEMO
	REMOTE CONTROLLER					CH/ CAT			VOLUME
		RC5001SR					SPKR A/B	MUTE

1. Press and hold down the SOURCE button for the appliance which should be controlled and press SET button until the SEND indicator blinks twice. Then back light flushes.

2. Press the 4-digit code for appliance (code table at the end of this book)

When the procedure is successful, the SEND indicator will blink twice.

Note:

If the indicator did not blink twice, then repeat steps 1 through 2 and try entering the same code again.

SCANNING THE CODE TABLE

					3.	SOURCE	SET	OFF	ON
		LEARN	SEND			l/
						SLEEP	DISPLAY	P.DIRECT	SURROUND
									LIP SYNC/
2.	SOURCE	SET	OFF	ON		AUTO	2	dts	INPUT
	l/					1		3
	SLEEP	DISPLAY	P.DIRECT	SURROUND		CS	EX/ES	VIRTUAL	T.MODE
				LIP SYNC/		4	5	6
	AUTO		dts	INPUT
	1	2	3			M-CH ST	STEREO	NIGHT	P.SCAN
						7	8	9
	CS	EX/ES	VIRTUAL	T.MODE	3.
	4	5	6				7.1CH IN	A/D	HT-EQ
						CL	0	+10	MEMO
	DISC+	ANGLE	SUB TITLE	AUDIO		CH/ CAT	SPKR A/B	MUTE	VOLUME
	CH-SEL	V-OFF	ATT.
							MULTI/ CAT	M-SPKR
	BASS		TREBLE
2.	TV	DVD	VCR	DSS	5.
						INFO			MENU
	TUNER	CD	CDR	MD
	TAPE	AUX1	AUX2	AMP			ENTER
						T.TONE
	REMOTE CONTROLLER					/SET UP			EXIT

RC5001SR

1. Switch on the appliance which should be controlled.

2. Press and hold down the SOURCE button for appliance which should be controlled and press SET button until the SEND indicator blinking twice. Then back light flushes.

3. Aim the remote control at the appliance and slowly alternate between pressing CH+ button and the SOURCE ON/OFF button for the appliance.

4. Stop when the appliance turns off.

5. Press ENTER button once to lock in the code.

CHECKING THE CODE

						SOURCE	SET	OFF	ON
						l/
					3.	SLEEP	DISPLAY	P.DIRECT	SURROUND
		LEARN	SEND
									LIP SYNC/
						AUTO		dts	INPUT
1.	SOURCE	SET	OFF	ON		1	2	3
	l/					CS	EX/ES	VIRTUAL	T.MODE
	SLEEP	DISPLAY	P.DIRECT	SURROUND	4.	4	5	6
				LIP SYNC/		M-CH ST	STEREO	NIGHT	P.SCAN
	AUTO		dts	INPUT		7	8	9
	1	2	3
							7.1CH IN	A/D	HT-EQ
						CL	0	+10	MEMO
						CH/ CAT	SPKR A/B	MUTE	VOLUME
	DISC+	ANGLE	SUB TITLE	AUDIO
	CH-SEL	V-OFF	ATT.				MULTI/ CAT	M-SPKR
	BASS		TREBLE
1.	TV	DVD	VCR	DSS		INFO			MENU
					2.
	TUNER	CD	CDR	MD
	TAPE	AUX1	AUX2	AMP			ENTER
						T.TONE
						/SET UP			EXIT

REMOTE CONTROLLER

RC5001SR

1. Press and hold down the SOURCE button for appliance which should be controlled and press SET button until the SEND indicator blinking twice then back light flushes.

2. Press the INFO button.

The SEND indicator will blink twice.

3. To view the code for first digit, press 1 once.

Wait 3 seconds, count the SEND indicator blinks (e.g. 3 blinks = 3) and write down the number.

Note:

If a code digit is “0”, the SEND indicator will not blink.

4. Repeat step 3 three more times for remaining

digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit.

RESETTING THE CODE

		LEARN	SEND				LEARN	SEND
1.	SOURCE	SET	OFF	ON		SOURCE	SET	OFF	ON
	l/					l/
	SLEEP	DISPLAY	P.DIRECT SURROUND			SLEEP	DISPLAY	P.DIRECT	SURROUND
				LIP SYNC/					LIP SYNC/
	AUTO		dts	INPUT		AUTO		dts	INPUT
	1	2	3			1	2	3
						CS	EX/ES	VIRTUAL	T.MODE
						4	5	6
	DISC+	ANGLE	SUB TITLE	AUDIO		M-CH ST	STEREO	NIGHT	P.SCAN
	CH-SEL	V-OFF	ATT.			7	8	9
							7.1CH IN	A/D	HT-EQ
	BASS		TREBLE		2.	CL	0	+10	MEMO
1.	TV	DVD	VCR	DSS
						CH/ CAT	SPKR A/B	MUTE	VOLUME
	TUNER	CD	CDR	MD
	TAPE	AUX1	AUX2	AMP			MULTI/ CAT	M-SPKR
	REMOTE CONTROLLER					INFO			MENU
		RC5001SR

1. Press and hold down the SOURCE button for appliance which should be controlled and press SET button until the SEND indicator blinking twice.

Then back light flushes.

2. Press the below codes to reset.

TV : 1000

DVD : 2000

VCR : 3000

DSS : 4000

The indicator will blink twice.

Note:

After this procedure, the selected SOURCE button is set initial code.

ENGLISH

15