Marantz SR4001 (FM) TUNING MODE (AUTO STEREO OR MONO), AUTO PRESET MEMORY, MANUAL PRESET MEMORY, RECALLING A PRESET STATION, PRESET SCAN

(FM) TUNING MODE (AUTO STEREO OR MONO)

SOURCE	SET	OFF	ON
l/
SLEEP	DISPLAY	P.DIRECT	SURROUND
			LIP SYNC/
AUTO		dts	INPUT
1	2	3
CS	EX/ES	VIRTUAL	T.MODE
4	5	6
M-CH ST	STEREO	NIGHT	P.SCAN
7	8	9
	7.1CH IN	A/D	HT-EQ
CL	0	+10	MEMO
CH/ CAT	SPKR A/B	MUTE	VOLUME
	SPKR A/B	MUTE

When in the auto stereo mode, AUTO indicator will be illuminated on the display.

The “ST” indicator is illuminated when a stereo broadcast is tuned in.

At open frequencies, the noise is muted and the “TUNED” and “ST” indicators are not illuminated.

If the signal is weak, it may be difﬁcult to tune into the station in stereo. In such a case, press the T-MODEbutton on the front panel or remote.

“AUTO” indicator is not illuminated, if FM stereo broadcasts are received in monaural and the “ST” indicator is not illuminated.

To return to auto stereo mode, press the T-MODEbutton or press T-MODEbutton on the remote again. AUTO indicator is illuminated on the display.

PRESET MEMORY

With this unit you can preset up to 50 FM/AM stations in any order.

For each station, you can memorize the frequency and reception mode if desired.

AUTO PRESET MEMORY

This function automatically scans the FM and AM band and enters all stations with proper signal strength into the memory.

2. 4. 2. 5. 1. 3.

AV SURROUND RECEIVER SR5001

1. To select FM, press the BAND button on the front panel.

2. While pressing the MEMO button, press the cursor button.

“AUTO PRESET” will appear on the display, and scanning starts from the lowest frequency.

3. Each time the tuner ﬁnds a station, scanning will pause and the station will be played for ﬁve seconds.

During this time, the following operations are possible.

The band can be changed by the BAND button.

4. If no button is pressed during this period, the current station is memorized in location Preset 02.

If you wish to skip the current station, press the 3 cursor button during this period, this station is skipped and auto presetting continues.

5. Operation stops automatically when all 50 preset memory positions are ﬁlled or when auto scanning attains the highest end of all bands. If you desire to stop the auto preset memory at anytime, press the CLEAR button.

MANUAL PRESET MEMORY

3.	2. 4.	SLEEP	DISPLAY	P.DIRECT	SURROUND
3.	2. 4.				LIP SYNC/
		AUTO		dts	INPUT
	3.	1	2	3
ECEIVER SR5001
		CS	EX/ES	VIRTUAL	T.MODE
		4	5	6
		M-CH ST	STEREO	NIGHT	P.SCAN
		7	8	9
			7.1CH IN	A/D	HT-EQ
	2.	CL	0	+10	MEMO
	2.	CH/ CAT	SPKR A/B	MUTE	VOLUME
			SPKR A/B	MUTE
			MULTI/ CAT	M-SPKR
		INFO			MENU

(Using the SR5001)

1. Tune into the radio station you desire (Refer to the “MANUAL TUNING” or “AUTO TUNING” section).

2. Press the MEMO button on the front panel. “– –“ (preset number) starts blinking on the display.

3. Select the preset number by pressing the 1 or 2 cursor buttons, while this is still blinking (approx. 5 seconds)

4. Press the MEMO button again to enter. The display stops blinking.

The station is now stored in the speciﬁed preset memory location.

(Using the remote control unit)

1. Tune into the radio station you desire (Refer to the “MANUAL TUNING” or “AUTO TUNING” section).

2. Press the MEMO button on the remote. “– –“ (preset number) starts blinking on the display.

3. Enter the desired preset number by pressing the numeric buttons.

Note:

When entering a single digit number (2 for example), either input “02” or just input “2” and wait for a few seconds.

RECALLING A PRESET STATION

1.	SLEEP	DISPLAY	P.DIRECT	SURROUND
				LIP SYNC/
	AUTO		dts	INPUT
1.	1	2	3
	CS	EX/ES	VIRTUAL	T.MODE
	4	5	6
	M-CH ST	STEREO	NIGHT	P.SCAN
	7	8	9
		7.1CH IN	A/D	HT-EQ
	CL	0	+10	MEMO
	CH/ CAT	SPKR A/B	MUTE	VOLUME
		SPKR A/B	MUTE
	REC	T.DISP	PTY	F.DIRECT
1.	- PRESET +		- TUNING +
1.	DISC+	ANGLE	SUB TITLE	AUDIO

(Using the SR5001)

1. Select the desired preset station by pressing the 1or 2cursor buttons on the front panel

(Using the remote control unit)

1. Press the S or T buttons to select the desired preset station, or input your desired preset channel with the numeric buttons on the remote.

PRESET SCAN

	CS	EX/ES	VIRTUAL	T.MODE	1.
	7	8	9		1.
	4	5	6
	M-CH ST	STEREO	NIGHT	P.SCAN
3.		7.1CH IN	A/D	HT-EQ	3.
	CL	0	+10	MEMO	3.
	CH/ CAT	SPKR A/B	MUTE	VOLUME
	REC	T.DISP	PTY	F.DIRECT
	- PRESET +		- TUNING +		3.
	DISC+	ANGLE	SUB TITLE	AUDIO	3.
	CH-SEL	V-OFF	ATT.

(Using the remote control unit)

1. Press the P.SCAN on the remote.

“PRESET SCAN” appears on the display and then the preset station with the lowest preset number is recalled ﬁrst.

2. Preset stations are recalled in sequence (No.1

→No.2 → etc.) for 5 seconds each.

No stored preset number will be skipped.

3. You can fast forward the preset stations by pressing the Tcontinuously.

When the desired preset station is received, cancel the preset scan operation by pressing the CLEAR button or P.SCAN on the remote.

ENGLISH