BASIC OPERATION

(PLAYBACK)

SELECTING AN INPUT SOURCE

Before you can listen to any input media, you must first select the input source on the SR4001/SR5001.

Example : DVD

VIDEO CONVERT

When this function is activated, the video or S-video signal can be emitted from the video, S- video or component video output terminal.

To activate this function, select VIDEO CONVERT in PREFERENCE menu and set ENABLE.

Notes:

• The component video signal is emitted only from

component video output terminal.

When the video equipment is connected by

SR4001/SR5001

 

HDMI

 

ENGLISH

 

VIDEO

HDMI

VIDEO

component

or S-VIDEO

 

S-VIDEO

 

 

 

component

 

 

 

 

 

The signal cannot be converted from the component to the video or S-video.

DISC+ ANGLE

SUB TITLE AUDIO

CH-SEL V-OFF

ATT.

BASS

TREBLE

TV DVD VCR DSS

TUNER CD CDR MD

TAPE AUX1 AUX2 AMP

REMOTE CONTROLLER

RC5001SR

To select DVD, turn the INPUT SOURCE knob on the front panel or simply press the DVD button on the remote.

After you have selected DVD, simply turn on the DVD player and play the DVD.

•As the input source is changed, the new input name will appear momentarily an OSD information on the video display. The input name will also appear in the display, on the front-panel.

•As the input is changed, the SR4001/SR5001 will automatically switch to the digital input, surround mode, attenuation, and night mode status which were entered during the configuration process for that source.

•When an audio source is selected, the last video input used remains routed to the VCR1 Output and Monitor Output. This permits simultaneous viewing and listening to different sources.

•When a Video source is selected, the video signal for that input will be routed to the Monitor Output jacks and will be viewable on a TV monitor connected to the SR4001/SR5001.

If a component video input is connected to the DVD or DSS component inputs, it will be routed to the Component Video Output. Make certain that your TV is set to the proper input to view the signal.

component terminal, connect the monitor and

SR4001/SR5001 by the component terminal.

• This function is unavailable for the REC out

terminal.

• This function is unavailable for the still picture, fast

forward and reverse playing of the video component.

• If, while attempting to use the video convert feature,

the SR4001/SR5001 cannot synchronize with the

display device, “NO SIGNAL” appears on the

monitor, or noise is generated, this feature cannot

be used. All of these signs are caused by equipment

incompatibility; there is nothing wrong with the

SR4001/SR5001.

In such case, set VIDEO CONVERT in the

PREFERENCE menu to DISABLE. Also, connect

the video input signal to the display device via the

MONITOR OUT terminal under VIDEO and the

S-video input signal to the display device via the

MONITOR OUT terminal under S-VIDEO.

Example:

Monitor is connected with the component.

SR5001 only

VIDEO

component

Monitor is connected with the video or S-video.

SR5001 only

 

 

 

 

 

 

 

 

 

 

VIDEO

 

 

 

or S-VIDEO

Monitor is connected with the video or component.

SR4001/SR5001

Notes of OSD menu:

•The setup menu can be displayed through all video out (COMPONENT, S-VIDEO, VIDEO).

•The setting informations (e.g. volume setting) are displayed through all video out when the VIDEO CONVERT function are set ON.

Note:

No setting information is displayed when the signal is emitted from the COMPONENT IN to

COMPONENT OUT.

•The setting informations (e.g. volume setting) are displayed through the S-VIDEO or VIDEO out when the VIDEO CONVERT function are set DISABLE. When the S-VIDEO and VIDEO outputs are used simultaneously, the setting informations are displayed through the S-VIDEO out only.

VIDEO

S-VIDEOHDMI component

Notes of OSD menu:

HDMI: OSD menu is not displayed.

VIDEO/S-VIDEO/component: VIDEO CONVERT of HDMI is not possible, thus the OSD menu is not displayed.

S-VIDEOVIDEO

component

31