Marantz SR4021 manual Manual Preset Memory, Strength into the memory

Press and hold down the MEMORY button and AUTO TUNE button simutaneously, auto presetting will start.

“MEMORY” indicator blinks in the display.

Tune into the desired radio station. (See the “MANUAL TUNING” or “AUTO TUNING”).

PRESET MEMORY

You can preset up to 30 AM/FM stations in any order.

For each station, you can memorize the frequency and reception mode if desired.

MANUAL PRESET MEMORY

2. 4.

RECEIVER SR4021

MULTI JOG

RECALLING A PRESET STATION		PRESET SCAN	ENGLISH
1.	1.	1.
RECEIVER SR4021		3.
MULTI JOG

AUTO PRESET MEMORY		3.
This function automatically scans the AM and FM		2.
band and enters all stations with proper signal WER ON/OFF	TUNER
PHONOCD

strength into the memory.

					1.
PHONO	CD	TUNER	1	2	AUX
WER ON/OFF

4. 3. 1.	3.
RECEIVER SR4021
MULTI JOG	VOLUME
	DOWN
1	2
PHONOCDTUNER12AUX	VCRDSSDVD

R ON/OFF

1. Select the FM band with the BAND button on the front panel.

2. Tune in the lowest receivable frequency.

3.

4. Each time the tuner finds a station, the scanning will pause and memory.

5. Operation stops automatically when all 30 preset memory positions are filled or when auto scanning attains the highest end of all bands. To stop the auto preset function at anytime, press the CLEAR button.

Note:

If Auto Presetting is interrupted by pressing the CLEAR button, the memory which has already been set is kept still.

(Using the SR4021)

1.

2. Press the MEMORY button on the front panel.

3. Select the preset number by turning the MULTI JOG knob while it is still blinking. (approx. 5 second)

4. Press the MEMORY button again to enter. “MEMORY” indicator stops blinking and goes out.

The station is now stored in the specified preset memory location.

(Using the remote control unit)

1. Tune into the desired radio station. (See the “MANUAL TUNING” or “AUTO TUNING”).

2. Press the MEMO / PROG button on the remote control unit. “MEMORY” indicator blinks in the display.

3. Enter the desired preset number by pressing the numeric keypads.

Notes:

•When entering a single digit number (2 for example), either input “02” or just input “2” and wait for a few seconds.

•If a preset number already used is selected ,the currently tuned station is stored with the preset number and the formerly stored station with the number is erased without any warning.

(Using the SR4021)

1. Press the F/P button to show the preset station on the display. Select the desired preset station by turning the MULTI JOG knob on the front panel.

(Using the remote control unit)

1. Press the CHANNEL/SKIP Sor Tbutton to select the desired preset station, or input the desired preset channel with the numeric keypad on the remote control unit.

3.

(Using the remote control unit)

1. Press the P.SCAN on the remote control unit.

The preset station with the lowest preset number is recalled first.

2. Preset stations are recalled in sequence (No. 1

→No. 2 → etc.) for 5 seconds each.

No stored preset number will be skipped.

3. You can fast forward through the preset stations by pressing the CHANNEL / SKIP

Tcontinuously.

When the desired preset station is received, cancel the preset scan operation by pressing the CLEAR or P.SCAN.

15