ENGLISH
REMOTE CONTROL
OPERATION
| 1 |
| 2 |
| 3 |
25 | 4 |
| 5 |
24 | 6 |
| |
| 7 |
23 | 8 |
22 | 9 |
21 | |
20 | 10 |
| |
19 | 11 |
18 | 12 |
| 13 |
17
14
16 | 15 |
FUNCTION AND OPERATION
The provided remote control unit can be used to control a Marantz audio/visual component such as a DVD player, CD player.
The POWER button, numeric buttons and control buttons are used in common across different input source components.
The input source controlled with the remote control unit changes when one of the input selector buttons on the remote control unit is pressed.
•Example
To select the DVD as the input source and play the DVD player.
Press the DVD button. The input selector of the SR4021 is switched to DVD and the remote control unit is set for control of the DVD player.
Press the PLAY button on the remote control unit.
zMAIN POWER button
Press to switch the power of the SR4021 ON or
STANDBY.
xTransmitting indicator
Lights up during a button is pressed and an infrared signal is sending.
cSOURCE POWER button
Press to switch the power of the source component after pressing the function selector button.
vDIMMER button
When this button is pressed once, the display is dimmed. When this button is pressed twice, the display is turned off and the “DISPLAY OFF” indicator lights up.
Press this button again to turn on the display again.
bS
When this button is pressed, the audio signal will bypass the balance and tone control circuit to provide the pure sound quality.
nMUTE button
Press this button decrease the sound temporarily. Press this button again to return to the previous sound level.
mVOLUME up (3)/down (4) buttons
Press to adjust the volume control of SR4021.
,BASS up (3)/down (4) buttons
These buttons are used to adjust the tone control of low frequency sound.
.TREBLE up (3)/down (4) buttons
These buttons are used to adjust the tone control of high frequency sound.
⁄0 PAUSE button
(When CD/RECORDER/VCR/DVD mode is selected)
Press this button to pause each programs.
⁄1 PLAY button
(When CD/RECORDER/VCR/DVD mode is selected)
Press this button to playback each programs.
⁄2 BAND / STOP button
(When tuner mode is selected)
Press this button to switch between FM and AM.
(When CD/RECORDER/VCR/DVD mode is selected)
Press this button to stop each programs.
⁄3 Cursor, ENTER, MENU, etc. buttons
These buttons are used when operating the DVD player, VCR, etc. The function of these buttons are dependent on the function button selected. For the controllable functions of each input function, please refer to controllable table on page 7.
⁄4 F.DIR / ANGLE button
(When tuner mode is selected)
Press this button to change tuner mode to Frequency Direct Call mode. You can call your desired frequency with numeric button of the remote control unit in this mode.
⁄5 MEMO / PROG. button
Memory enable button for various preset functions.
⁄6 CLEAR button
This button is used to cancel for certain memory or programming operations.
⁄7 Numeric buttons 0 to +10
These buttons are used to enter figures in the selection of a tuner preset station and station name preset or to set select a DVD chapter or title and a CD track number, etc. The functions of these buttons are dependent on the function button selected.
⁄8 TUNE/SEARCH buttons
(When tuner mode is selected)
These button are used to increase or decrease the frequency to which the tuner is currently tuned. Press and hold one of these buttons to initiate the auto tuning operation.
⁄9 CHANNEL/SKIP buttons
(When tuner mode is selected)
These button are used to move up or down through the preset stations.
¤0
(When tuner mode is selected)
Press this button to select the auto stereo mode or mono mode when the FM band is selected.
¤1 P.SCAN button
(When tuner mode is selected)
This button is used to start preset scan when TUNER mode is selected in SR4021.
¤2 TV INPUT button
Press this button to select TV input mode.
¤3 SPKR 1/2 button
Press this button to select the speaker system (or systems) which is to be used. Each time it is pressed, the setting is selected in the following sequence in turn: 1 only ON → 2 only ON → 1 and 2 ON → 1 and 2 OFF → 1 only ON, and so on. The speaker indicator (or indicators) corresponding to the speaker (or speakers) which has been set to the active status lights.
When headphones have been connected, speakers 1 and 2 are automatically set to OFF.
¤4 Input selector buttons/ FUNCTION
SELECTOR buttons
(AUDIO/VIDEO INPUT)
These buttons are used to select a Audio or Video source component. When one of these buttons is pressed, the input function of the SR4021 is changed.
Audio function sources such as PHONO, CD, TUNER, RECORDER1 and RECORDER2 may be selected in conjunction with a Video source.
This feature (Sound Injection) combines a sound from one source with a picture from another. Choose the video source first, and then choose a different audio source to activate this function.
¤5 SLEEP button
This button is used for setting the sleep timer.
6
