CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETY

INSTRUCTIONS

READ BEFORE OPERATING EQUIPMENT

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

NOTE TO CATV SYSTEM INSTALLER:

This reminder is provided to call the CATV (Cable-TV) system installer’s attention to Section 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.

1.

Read Instructions – All the safety and

 

operating instructions should be read before

 

the product is operated.

2.

Retai n I ns tr u ctio ns – The s afety a n d

 

operating instructions should be retained for

 

future reference.

3.

Heed Warnings – All warnings on the product

 

and in the operating instructions should be

 

adhered to.

4.

Follow Instructions – All operating and use

 

instructions should be followed.

5.

Cleaning – Unplug this product from the

 

wall outlet before cleaning. Do not use liquid

 

cleaners or aerosol cleaners. Use a damp

 

cloth for cleaning.

6.

Attachments – Do not use attachments not

 

recommended by the product manufacturer

 

as they may cause hazards.

7.

Water and Moisture – Do not use this product

 

near water-for example, near a bath tub,

 

wash bowl, kitchen sink, or laundry tub, in a

 

wet basement, or near a swimming pool, and

 

the like.

9.A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

10.Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

11.Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

NOTE:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

8. Accessories – Do not place this product on

an unstable cart, stand, tripod, bracket, or

table. The product may fall, causing serious

injury to a child or adult, and serious damage

to the product. Use only with a cart, stand,

tripod, bracket, or table recommended by the

manufacturer, or sold with the product. Any

mounting of the product should follow the

manufacturer’s instructions, and should use

a mounting accessory recommended by the

manufacturer.

Page 2
Image 2
Marantz SR4021 manual Read Before Operating Equipment

SR4021 specifications

The Marantz SR4021 is a powerful and sophisticated AV receiver, designed to cater to both audiophiles and casual listeners seeking an exceptional audio-visual experience. This model stands out in the Marantz lineup, showcasing the brand's commitment to high fidelity sound and innovative technology.

At the heart of the SR4021 is its dynamic power output, which delivers a robust 100 watts per channel across seven channels. This capability ensures that the receiver can accurately reproduce a wide range of audio content, from delicate musical nuances to the explosive sounds of modern cinema. The amplifier section employs discrete component design, which enhances sound clarity and preserves the integrity of audio signals, making it a reliable choice for both home theater setups and music systems.

One of the key features of the SR4021 is its support for advanced audio formats. The receiver is equipped with capabilities to decode popular surround sound formats such as Dolby Atmos and DTS:X, allowing users to enjoy immersive 3D audio experiences that transport them into the narrative of their favorite films. Additionally, it supports the latest high-resolution audio formats, ensuring that audiophiles can experience their music in studio-quality sound.

Another noteworthy aspect of the SR4021 is its extensive connectivity options. The receiver includes multiple HDMI inputs, allowing users to connect various devices such as gaming consoles, streaming devices, and Blu-ray players. The HDMI ports support 4K passthrough and HDR, making it an ideal choice for modern 4K television setups. Furthermore, the inclusion of Wi-Fi and Bluetooth connectivity enables seamless streaming from smartphones and tablets, providing versatility in how content can be enjoyed.

Marantz also prioritizes user-friendly operation with the SR4021. The intuitive on-screen interface makes it easy to navigate through settings and configurations, while the accompanying remote control offers direct access to frequently used functions. Additionally, the receiver is compatible with various control systems, allowing for integration into smart home environments.

In conclusion, the Marantz SR4021 is an exceptional AV receiver that combines high power output, advanced audio decoding capabilities, and extensive connectivity options, making it a top choice for both serious home theater enthusiasts and casual listeners alike. With its superior sound quality and user-friendly features, the SR4021 epitomizes Marantz's dedication to the art of audio.