CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETY

INSTRUCTIONS

READ BEFORE OPERATING EQUIPMENT

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

NOTE TO CATV SYSTEM INSTALLER:

This reminder is provided to call the CATV (Cable-TV) system installer’s attention to Section 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.

1.

Read Instructions – All the safety and

 

operating instructions should be read before

 

the product is operated.

2.

Retain Instructions – The safety and operating

 

instructions should be retained for future

 

reference.

3.

Heed Warnings – All warnings on the product

 

and in the operating instructions should be

 

adhered to.

4.

Follow Instructions – All operating and use

 

instructions should be followed.

5.

Cleaning – Unplug this product from the wall

 

outlet before cleaning. Do not use liquid

 

cleaners or aerosol cleaners. Use a damp

 

cloth for cleaning.

6.

Attachments – Do not use attachments not

 

recommended by the product manufacturer

 

as they may cause hazards.

7.

Water and Moisture – Do not use this product

 

near water-for example, near a bath tub, wash

 

bowl, kitchen sink, or laundry tub, in a wet

 

basement, or near a swimming pool, and the

 

like.

8.

Accessories – Do not place this product on an

 

unstable cart, stand, tripod, bracket, or table.

 

The product may fall, causing serious injury to

10.Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

11.Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

NOTE:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

a child or adult, and serious damage to the

product. Use only with a cart, stand, tripod,

bracket, or table recommended by the

manufacturer, or sold with the product. Any

mounting of the product should follow the

manufacturer’s instructions, and should use a

mounting accessory recommended by the

manufacturer.

9. A product and cart combination should be

moved with care. Quick stops, excessive

force, and uneven surfaces may cause the

product and cart combination to overturn.

Page 2
Image 2
Marantz SR4600 manual Read Before Operating Equipment

SR4600 specifications

The Marantz SR4600 is an AV receiver that combines an array of advanced technologies and high-quality audio capabilities, making it a popular choice for both home theater enthusiasts and casual listeners. With its sleek design and robust build, the SR4600 not only complements modern interiors but also delivers a superior audiovisual experience.

One of the defining features of the SR4600 is its multi-channel amplification. This receiver is equipped to process and amplify audio from various sources, providing rich and immersive sound across multiple channels. With 6.1 channel capability and a total output of 90 watts per channel, it effectively delivers powerful sound reproduction, whether you’re enjoying a blockbuster movie or listening to your favorite music.

The SR4600 supports various surround sound formats, including Dolby Digital and DTS, which enhances the spatial quality of audio, allowing users to feel as if they are in the midst of the action. Furthermore, the receiver features Marantz's proprietary circuitry for high-resolution audio, ensuring that sound fidelity remains uncompromised, even at higher volume levels.

Connectivity is a standout feature of the Marantz SR4600. It comes with multiple HDMI inputs, allowing seamless integration with an array of high-definition devices such as Blu-ray players, gaming consoles, and streaming devices. The SR4600 also supports component and composite video inputs, making it versatile for legacy equipment. Additionally, the receiver includes digital audio inputs for quick connection with a variety of audio sources.

User-friendly features such as an intuitive on-screen display and an easy-to-navigate remote control make setup and operation straightforward, even for those who might not be technologically savvy. Moreover, the Marantz SR4600 incorporates a range of sound processing modes, allowing users to tailor their audio experience based on their preferences or the type of content they are enjoying.

Finally, build quality is essential in the Marantz ethos. The SR4600 is crafted with high-grade materials, ensuring longevity and reliability. Its attractive front panel features chrome accents and easily accessible buttons, merging aesthetics with functionality.

In summary, the Marantz SR4600 AV receiver is a powerful and versatile option for anyone looking to elevate their home audio and video experience. With its advanced sound technologies, rich connectivity options, and user-friendly interface, it remains a cherished component for audio and home theater setups.