Marantz SR4600 manual Speakers Level Setting Without Test Tone, Ttest Mode

ENGLISH	2-3. SPEAKERS LEVEL SETTING WITH TEST TONE
	Here you will set the volume for each speaker so
	that they are all heard by the listener at the same
	level. Moreover, if the T.TONE button is pressed,
	unit can enter into this menu directly.
	Note:

•The speaker level settings are not available in 7.1 Channel Input mode, CS mode and Multi Channel Stereo mode.

T(TEST) MODE :

Selects “ MANUAL” or “ AUTO” for generating mode of test toneorcursor button.

1. When you select “MANUAL” in T-MODE menu by pressing the or button, this unit will emit a pink noise from the front left speaker. At this time, adjust the desired level of the master volume. Remember the level of this noise and then press the button. This unit will emit the pink noise from the center speaker.

2. Using the and cursor buttons, adjust the volume level of the noise from the center speaker so that it is the same level as the front left speaker (Note that this can be adjusted to any level between – 10 and +10 dB in 1dB intervals).

MENU STRUCTURE of Speaker Level setup

Direct select	Speakers
by remote	Distance	Test Tone mode
control	setup
		MANU	AUTO
			(Auto)
		Speaker
			SW
	Speakers	L	C	R
	Level setup
			Listening

If you select “AUTO” by pressing thebutton, the test tone will be cycled through in a circular pattern which is L (Left) → C (Center) → R (Right) → SR (Surround Right) → SBR (Surround Back Right) → SBL (Surround Back Left) → SL (Surround Left) → SW (Subwoofer) → L →.. increments of 2 seconds for each channel.

Using the and cursor buttons, adjust the volume level of the noise from the speaker so that it is the same level for all speaker.

Press the ENTER button, you can stop the test tone mode. Or press the or cursor button to select “EXIT” then press the ENTER button to exit the SETUP MENU.

Or press the or cursor button to select “RETURN” then press the ENTER button to return the previous “2-2. Speakers Distance” setup.

Maximum

1 dB interval

Reference

1 dB interval

Minimum

+10dB

+9dB

button

0dB

button

-9dB

-10dB

(SW -15 dB)

SL	Positiom	SR
	SBL	SBR
TO MAIN MENU	RETURN	EXIT
MAIN	Speakers	exit SETUP
MENU	Distance setup	MENU

If you select “MANUAL”, adjust the output level of each speaker as follow.

1. 3. 5. 1. 5. 1. 2. 5. 5.

AV SURROUND RECEIVER SR4600

INPUT SELECTOR

DISP

MULTI

AUTO

TUNED

ST V – OFF

NIGHT

PEAK

ATT

ANALOG

SURROUND

SLEEP

AUTO SURR

DIRECT

DISC 6.1

MTX 6.1

EQ

DIGITAL

DIGITAL

L

R

AAC PCM

SURROUND

PURE

SIMPLE

MODE

DIRECT

SETUP

DISPLAY

MEMORY

CLEAR

7.1CH INPUT

S. SPEAKER B

STANDBY

ENTER

AUTO

HT-EQ

MENU

EXIT

BAND

T-MODE

POWER ON/STANDBY

PHONES

		AUX1	AMP
2. 5.	TV		MAIIN
	VOL.	SLEEP	MUTE VOL.
1. 5.	OSD		MENU
		ENTER
1. 3. 5.	SET UP/		MENU OFF	5.
	T.TONE
	PURE DIRECT	AUTO	DTS

1 2 3

NIGHT CSII EX/ES VIRTUAL

4 5 6

3. Press the cursor button again. This unit will now emit the pink noise from the front right speaker.

4. Repeat steps 2 and 3 above for the front right and other speakers until all speakers are adjusted to the same volume level.

5. Press the ENTER button, you can stop the test tone mode. Or press the or cursor button to select “EXIT” then press the ENTER button to exit the SETUP MENU.

Or press the or button to select “RETURN” then press the ENTER button to return the previous “2-2. Speakers Distance” setup.

Notes:

•Speakers that you selected “None” for in the Speaker Size Setup menu will not appear.

•The setup level for each channel is memorized for reproduction in all surround mode by this method exclude CS mode, Multi channel stereo mode and 7.1 ch input mode.

•To adjust the speaker levels for 7.1-channel input sources, you will need to use the 7.1CH Level Input setup menu.

2-4. SPEAKERS LEVEL SETTING WITHOUT TEST TONE

Channel level (speaker level) can be adjusted without using test tone.

Note:

•Four channel level settings can be memorized for reproduction: the 7.1 ch input mode, CS mode, Multi channel stereo mode, and all other surround modes, respectively.

1.Set the surround mode or 7.1 ch input mode which you want to adjust the channel level.

2.Press the CH.SEL button on the remote.

3.Select the desired channel (speaker) with the orcursor buttons.

4.Adjust the level with theorcursor buttons.

5.After completing the setup, press the CH.SEL button again.

20