Marantz SR4600 manual Preset Memory

ENGLISH	BASIC OPERATION
	(TUNER)
	LISTENING TO THE TUNER

Frequency scan step for AM is selectable. Default setup is 10 kHz step, if your country’s standard is 9 kHz step, Press TUNER button on the remote more than 6 seconds. Scan step will change.

Note:

•Preset memory for the tuner will clear by changing this setup.

AUTO TUNING

2.	1.		TV	VCR1	DSS/VCR2	DVD
		1.	TUNER	CD	TAPE	CDR/MD
				AUX1	AMP
			TV			MAIN
			VOL.	SLEEP	MUTE	VOL.
			CLEAR	MEMO	A/D	P.SCAN/V OFF
					0
					CHANNEL/SKIP
		2.	BASS	TREBLE	TUNE/SEARCH
				T-MODE	RDS	F.DIRECT
			INPUT/DISC+	AUDIO	SUB-T/ATT	PTY

(Using the SR4600)

1. To select tuner and desired band (FM or AM), press the BAND button on the front panel.

2. Press the orcursor buttons on the front panel for more than 1 second to start the auto tuning function.

3. Automatic searching begins then stops when a station is tuned in.

(Using the remote control unit)

1. To select tuner and desired band (FM or AM), press the TUNER button twice within in two seconds on the remote.

2. Press the 5 or 6 for more than 1 second on the remote.

3. Automatic searching begins then stops when a station is tuned in.

If tuning does not stop at the desired station, use to the “Manual tuning” operation.

MANUAL TUNING

2.	1.		TV	VCR1	DSS/VCR2	DVD
		1.	TUNER	CD	TAPE	CDR/MD
				AUX1	AMP
			TV			MAIN
			VOL.	SLEEP	MUTE	VOL.
			CLEAR	MEMO	A/D	P.SCAN/V OFF
					0
					CHANNEL/SKIP
		2.	BASS	TREBLE	TUNE/SEARCH
				T-MODE	RDS	F.DIRECT
			INPUT/DISC+	AUDIO	SUB-T/ATT	PTY

(Using the SR4600)

1. To select tuner and desired band (FM or AM), press the BAND button on the front panel

2. Press the or cursor buttons on the front panel to select the desired station.

(Using the remote control unit)

1. To select tuner and desired band (FM or AM), press the TUNER button twice within in two seconds on the remote.

2. Press the 5 or 6 on the remote to tune in the desired station.

DIRECT FREQUENCY CALL

						PURE DIRECT	AUTO		DTS
					3.		1	2	3
						NIGHT	CSII	EX/ES	VIRTUAL
	POWER						4	5	6
						DISPLAY	MCH-ST	STEREO	7.1CH IN
							7	8	9
						CLEAR	MEMO	A/D	P.SCAN/V-OFF
	TV	VCR1	DSS/VCR2	DVD				0
1.								CHANNEL/SKIP
	TUNER	CD	TAPE	CDR/MD
						BASS	TREBLE	TUNE/SEARCH
		AUX1	AMP		2.		T-MODE	RDS	F.DIRECT
	TV			MAIN
	VOL.	SLEEP	MUTE	VOL.
						INPUT/DISC+	AUDIO	SUB-T/ATT	PTY
						CH.SEL			LIP.SYNC
	OSD		MENU
						SYSTEM REMOTE CONTROLLER

1. To select tuner and desired band (FM or AM), press the TUNER button twice within two seconds on the remote.

2. Press the F.DIRECT on the remote, display will show “FREQ - - - -”.

3. Input your desired station’s frequency with the numeric buttons on the remote.

4. The desired station will automatically be tuned.

(FM) TUNING MODE (AUTO STEREO OR MONO)

	T-MODE	RDS	F.DIRECT
SURROUND
DIGITAL
INPUT/DISC+	AUDIO	SUB-T/ATT	PTY
AAC
CH.SEL			LIP.SYNC
SYSTEM REMOTE CONTROLLER
	RC5500SR

When in the auto stereo mode, AUTO indicator will be illuminated on the display.

The “ ST” indicator is illuminated when a stereo broadcast is tuned in.

At open frequencies, the noise is muted and the “TUNED” and “ST” indicators are not illuminated. If the signal is weak, it may be difficult to tune into the station in stereo. In such a case, press the T-MODEbutton on the front panel or remote.

“AUTO” indicator is not illuminated, if FM stereo broadcasts are received in monaural and the “ST” indicator is not illuminated.

To return to auto stereo mode, press the T-MODEbutton or press T-MODEbutton on the remote again. AUTO indicator is illuminated on the display.

PRESET MEMORY

With this unit you can preset up to 50 FM/AM stations in any order.

For each station, you can memorize the frequency and reception mode if desired.

AUTO PRESET MEMORY

This function automatically scans the FM and AM band and enters all stations with proper signal strength into the memory.

2. 4. 2. 5. 1. 3.

AV SURROUND RECEIVER SR4600

1. To select FM , press the BAND button on the front panel.

2. While pressing the MEMO button, press the cursor button.

“AUTO PRESET” will appear on the display, and scanning starts from the lowest frequency.

3. Each time the tuner finds a station, scanning will pause and the station will be played for five seconds.

During this time, the following operations are possible.

The band can be changed by the BAND button.

4. If no button is pressed during this period, the current station is memorized in location Preset 02.

If you wish to skip the current station, press the cursor button during this period, this station is skipped and auto presetting continues.

5. Operation stops automatically when all 50 preset memory positions are filled or when auto scanning attains the highest end of all bands. If you desire to stop the auto preset memory at anytime, press the CLEAR button.

MANUAL PRESET MEMORY

3.	2. 4.			ENTER
			SET UP/		MENU OFF
RECEIVER SR4600			T.TONE
			PURE DIRECT	AUTO		DTS
		3.		1	2	3
	SURROUND		NIGHT	CSII	EX/ES	VIRTUAL
	DIGITAL			4	5	6
	AAC
			DISPLAY	MCH-ST	STEREO	7.1CH IN
		2.		7	8	9
			CLEAR	MEMO	A/D	P.SCAN/V-OFF
					0
					CHANNEL/SKIP
			BASS	TREBLE	TUNE/SEARCH
				T-MODE	RDS	F.DIRECT

(Using the SR4600)

1. Tune into the radio station you desire (Refer to the “MANUAL TUNING” or “AUTO TUNING” section).

2. Press the MEMO button on the front panel. “– –“ (preset number) starts blinking on the display.

3. Select the preset number by pressing theor

cursor buttons, while this is still blinking (approx. 5 seconds)

4. Press the MEMO button again to enter. The display stops blinking.

The station is now stored in the specified preset memory location.

30