This section is for making the settings for video output resolution. Set them depending on the connected television.
Press RESOLUTION.• The resolution is changed as shown below each time RESOLUTION is pressed.
•The default settings is underlined.
•If the video resolution is not set to “Auto”, set it to correspond with the resolution of your television.
•Images will not be projected normally if the television resolution and this unit’s output resolution do not match.
•Audio and video will be temporarily interrupted if the power of the connected device currently playing is turned off, or the input is switched.
•When you change the video resolution of the unit, it takes a few seconds up to about 10 seconds for validation between the unit and the connected device. Audio/video is not output during this period.
version
Advanced
|
|
| Auto |
| Source Direct |
|
| 480/576i |
|
| 480/576P |
|
| |||||
|
|
| (Auto) | (Source direct) | (480/576 interlaced) | (480/576 progressive) |
| |||||||||||
|
|
| 1080P24 |
|
| 1080P |
|
|
| 1080i |
|
|
| 720P |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
| (1080 progressive, | (1080 progressive) |
| (1080 interlaced) | (720 progressive) | |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DVD | 27 |
|
version
Information