Marantz UD5007 Specifications, nn General, REMOTE CONTROL, nn Performance

GRemote control unitH

Symptom	Cause/Solution	Page
The set cannot be	• Aim the remote control directly at the infrared sensor window on	48
operated with the	the front of the unit.
remote control.	• Operate within a distance of 23 ft / 7 m from the remote control	48
	sensor.
	• Remove any obstacles.	48
	• Replace the batteries with new ones.	48
	• Insert the batteries in the proper direction, checking the q and	48
	w marks.
	• Match the signal code of the remote control to the signal code of	40, 49
	the unit.
	• Check whether the remote sensor of the unit is exposed to direct	48
	sunlight or strong light of a fluorescent lamp, 3D synchro signal of
	TV. Be sure to avoid exposing the remote sensor to strong light.
	• The switch on the back of the REMOTE CONTROL is on “EXT.	10
	(EXTERNAL)”. When using this unit independently, set the switch
	to “INT. (INTERNAL)”.

Specifications

nn Performance

Signal format :	NTSC, PAL
Applicable discs /memory device :	(1)	BD-Video disc :
		12 cm, 1 side, 1 layer; 12 cm, 1 side, 2 layers
	(2)	DVD-Video / DVD-Audio disc :
		12 cm, 1 side, 1 layer; 12 cm, 1 side, 2 layers /
		12 cm, 2 sides, 2 layers (1 side, 1 layer)
		8 cm, 1 side, 1 layer; 8 cm, 1 side, 2 layers /
		8 cm, 2 sides, 2 layers (1 side, 1 layer)
	(3)	Super Audio CD :
		12 cm, 1 layer / 12 cm, 2 layer / 12 cm, Hybrid
	(4)	Compact Disc (CD-DA) :
		12 cm / 8 cm disc
	(5)	Memory device :
		USB memory device (USB 2.0)
HDMI output :	Output terminal : 19-pin HDMI terminals, 1 set
	(Deep Colour, Dolby Digital Plus, Dolby TrueHD, DTS-HD, 3D)
Analog audio output :	Output level : 2 Vrms (10 kΩ)
	2 channels output terminal : Pin-jack, 1 set

version Basic

version Advanced

• Some functions may not be used under certain operating conditions, but this is not failure of the unit.

Read the description in this Owner’s Manual for details on correct operations.

• The volume may differ from disc to disc. This is due to the differences in how the signals are recorded

on the disc and is not a malfunction.

• During programmed playback, it is not possible to perform random playback or to start playback from a

desired track or file.

• Some functions are prohibited on some discs.

Audio output characteristics :	(1) Frequency response
	q BD (Linear PCM)

w DVD (Linear PCM)

e Super Audio CD r CD

:2 Hz - 22 kHz (48 kHz sampling)

:2 Hz - 44 kHz (96 kHz sampling)

:2 Hz - 88 kHz (192 kHz sampling)

:2 Hz - 22 kHz (48 kHz sampling)

:2 Hz - 44 kHz (96 kHz sampling)

:2 Hz - 88 kHz (192 kHz sampling)

:2 Hz - 40 kHz

:2 Hz - 20 kHz

Information

(2)S/N ratio : 115 dB (BD)

(3)Total harmonic distortion : 1 kHz, 0.0025 % (BD)

(4)Dynamic range : 100 dB (BD)

nn General

Power supply :	AC 120 V, 60 Hz
Power consumption :	20 W
(vpage 37 “Energy Saving Mode”)	0.3	W (Energy Saving Standby)
	0.5	W (Normal Standby)
	12 W (Quick Start)

zz For purposes of improvement, specifications and design are subject to change without notice.

DVD 64