Remote control unit

Remote control settings (remote control side)

Switches when this unit remote control operates another marantz BD players in the vicinity.

Set the remote control code simultaneously on the unit, too (vpage 40 “Remote ID”).

GRemote control code settingH

•The supplied remote control has two remote control code settings: BD 1 and BD 2.

•The code is set to “BD 1” at the factory.

•To set the code to “BD 2”, hold the 2 and 2 pressed for more than five seconds.

•To set (return) the code to “BD 1”, hold the 2 and 1 pressed for more than five seconds.

If the signal code of the remote control does not match the signal code of the unit, the remote control code set on the unit is shown on the display.

GExampleH

If the code setting on the unit is “BD1”, and the setting on the remote control is “BD2”, “BD1” is shown on the display.

NOTE

Match the signal code of the remote control with the signal code of the unit. If the remote control code is different, you cannot operate the this unit with the remote control.

DVD

49

 

version Basic

version Advanced

Information