Audio Settings
Settings for audio output are made.
Audio Output | Default settings are underlined. |
Set the audio output. |
|
Setting items | Setting details |
HDMI | Bitstream : For selecting when the device connected to the unit supports |
Sets the audio format output | Dolby TrueHD/Dolby Digital Plus/Dolby Digital or |
from the HDMI output | Surround. The output format is automatically selected according to the |
connector. | audio format or the number of channels supported by the connected |
| HDMI device. |
| PCM : For selecting when a device connected to the unit does not support |
| Dolby TrueHD/Dolby Digital Plus/Dolby Digital or |
| Surround. |
| Off : For outputting no audio signal from the HDMI output terminal of the |
| unit. |
| For converting audio signals, see “About digital signal audio output” |
| (vpage 56). |
| NOTE |
| If “BD Audio mode” is set to “HD Audio Output” |
| with OPTION on the remote control, BD secondary |
| audio and interactive audio are not output. |
System Information
MAC address is displayed.
MAC Address
Displays the MAC address.
Items
MAC address
version Basic
version Advanced
Information
Dynamic Range Compression Compresses the dynamic range of Dolby TrueHD/ Dolby Digital Plus/Dolby Digital Audio.
Off : Dynamic range is not compressed.
On : Dynamic range is compressed.
Auto : Dynamic range of Dolby TrueHD audio is automatically compressed according to the material. Audio of Dolby TrueHD only is compressed.
This setting compensates high volume to low and low volume to high when high volume is not desired at night.
DVD
42