Marantz VP-11S1 Advanced Connection, HD-Video / Satellite Cable Tuner / DVD Player, Compatible PC

ENGLISH

Connection with a HD-Video, DVD Player, Satellite, Cable Tuner or PC

You can connect this projector to HD-Video /PC using RGB IN port, or DVD Plyer /Satellite /Cable Tuner /PC using HDMI IN port.

1.Connect one end of the RGB cable to the RGB IN port, or one end of the HDMI cable to the HDMI IN port on the projector.

2.Connect the other end to the corresponding port on a HD-Video, Satellite, Cable Tuner or personal computer.

3.If using DVI-A or DVI-D output, use respectively a DVI-A-RGB or DVI-D-HDMI conversion cable.

Note : When projecting a video image from a device connected to the HDMI terminal, follow the procedure below.

1.Turn on power of this unit. (☞ P.16)

2.Set the input video source to HDMI input. (☞ P.16)

3.Turn on power of the device connected to the HDMI terminal of the unit (i.e. DVD player). If the procedure above is not followed, projected image may corrupt.

For the details of the HDMI terminal on the device connected with the unit, see the instruction manual of the device.

RGB (D-Sub monitor) cable

(commercially available)RGB OUT

or

DVI-A OUT

HD-Video / Satellite /

Cable Tuner / DVD Player

DVI-D OUT

or

HDMI OUT

Monitor output

RGB out

or

DVI-D out

HDMI-HDMI cable or HDMI-DVD-D cable

(commercially available)IBM VGA or

Compatible PC

Advanced Connection

You can control total home theater system using PC or Marantz receiver equipment. For installing below system, consult with Marantz authorized dealer.

Screen

RS-232C cable (female-female, straight type, commercially available)

RS-232C

External Controller

	3.5mm Mini Plug (Mono)
	(commercially available)
Control Adapter cable
(commercially available)
	REMOTE CONTROL IN
	REMOTE CONTROL OUT
Control Adapter cable	Receiver equipment
(supplied)

10