Marantz VP-11S1 manual Picture Adjust

Picture Adjust

Picture quality in each of the picture modes can be adjusted to your liking and those adjustments can be saved in memory.

User 1

–Gamma setting

To change the type of Gamma curve, set the Picture Mode (☞ p.22) to User (1 – 9). Select “Gamma” from the displayed menu followed by the desired gamma curve (A, B, C, D, E, Theater, Standard or Dynamic).

ABCDE

TheaterDynamic

ENGLISH

Picture Adjust

Fine Menu 1

Fine Menu 2

Input Signal

RGB/HD Adjust

Display

OSD/Blanking

Config.

Gamma	A
Contrast	0
Brightness	0
Color	0
Tint	0
Color Temp.	3
Lamp Mode	Normal
Iris	F6.0
Aspect	Full

A

B

C

D

E

Theater

Standard

Dynamic

– Color Temp. (Color Temperature)
1 :	Red comes out strong. Color temperature is about 5250 K.
2 :	Red is mildly strong. Color temperature is about 5800 K.
3 :	Normal. Color temperature is about 6500 K.
4 :	Blue is mildly strong. Color temperature is about 7500 K.

Item	Adjustments
Gamma	A, B, C, D, E, Theater,
	Standard, Dynamic
Contrast	-50Ô0Ô 50
	(Weak)	(Default)		(Strong)
Brightness	-50Ô0Ô 50
	(Dark)	(Default)		(Bright)
Color	-50Ô0Ô 50
	(Light)	(Default)		(Deep)
Tint	R50Ô 0Ô G50
	(Purple)	(Default)		(Green)
Color Temp.	1 2	3 4		5 HB
(Color Temperature)	(Red)		(Blue)
Lamp Mode	Normal, Economy
Iris	F6.0, F3.0
	Sets the lens aperture.
	F6.0: Use to prioritize contrast.
	F3.0: Use to prioritize brightness.
Aspect	Full, Normal, Zoom, V-Stretch,
	Through

5 :	Blue comes out strong. Color temperature is about 9300 K.
HB : High Bright : Display brightest image.

NOTES:

-To adjust picture quality, set the index to a mode other than the default. See “Picture Mode”. (☞ P.22)

-The Gamma cannot be set unless User (1 - 9) is set for the Picture Mode (☞ P.22).

-Tint cannot be adjusted for component input, HDMI input or PAL signals. For details, see “Functions by Signal.” (☞ P.20-21)

-The settings made in Picture Adjust are saved in the currently selected Picture Mode index.

23