Marantz VP8600 manual Initial Setting, Turning on the Power, Adjust the Zoom, Focus and Keystone

ENGLISH

INITIAL SETTING

Turning on the Power

1.Connect the mains cord to the projector. Connect the other end to a wall outlet. Turn on the main power switch. The Power LED blinks (blue) slowly.

2.Remove the lens cover.

3.Turn on the connected devices.

4.Press the ON button on the remote controller to turn on the projector. The Power LED lights blue and the projector splash screen displays.

STANDBY			ON
COMP.1	COMP.2	S VIDEO	FULL
C1	C2	S	F
DVI	RGB	VIDEO	NORMAL
DV1	RGB	V	N

THEATER STANDARD DYNAMIC ZOOM1

THTR STD DYN Z1

LOW-BRIGHT- HIGH C-TEMP ZOOM2

LB HB CT Z2

5.Press the INPUT 3 or INPUT 4 key to select the input signal source.

V-MUTEMENU

M

Adjust the Zoom, Focus and Keystone

1.Use the ZOOM ring (on the projector) to resize the projected image and screen size.

2.Use the FOCUS ring (on the projector) to sharpen the projected image.

FOCUS RING

ZOOM RING

3.Press MENU on the remote control to open the OSD.

4.Press 34 to select Config. and then press ENTER.

5.Press 1 2 to adjust the horizontal keystone and then press ENTER.

6.Press 1 2 to adjust the vertical keystone and then press ENTER.

7.Press the EXIT button twice to close the OSD.

4

INPUT

FE

FREEZEEXIT

PIP

ON/OFF INPUT SWAP MENU

CONTRAST BRIGHTNESS

CON- CON+ BRI- BRI+

V-MUTE

F

5, 6 FREEZE

MENU	3
M
	INPUT
E	7
EXIT

PIP

10