Marantz VP8600 Connection with a HD-Video, DVD Player, Satellite, Cable Tuner or PC, English

ENGLISH

COMPONENT 1: SCART

When connecting the COMPONENT 1 terminal to the SCART (RGB) out terminal, set COMPONENT 1 settings to [SCART]. (☞ P.19)

Scart to RGBCS cable

(commercially available)

SCART CONNECTOR

DVD Player

COMPONENT 1: RGB

When connecting the COMPONENT 1 terminal to the RGB HV out terminal, set COMPONENT 1 settings to [RGB]. (☞ P.19)

5RCA cable

(commercially available)

Connection with a HD-Video, DVD Player, Satellite, Cable Tuner or PC

You can connect this projector to HD-Video /PC using RGB IN port, or DVD Player/Satellite /Cable Tuner /PC using DVI-D IN port.

1.Connect one end of the RGB cable to the RGB IN port, or one end of the DVI-D cable to the DVI-D IN port on the projector.

2.Connect the other end to the corresponding port on a HD-Video, Satellite, Cable Tuner or personal computer.

Note : When projecting a video image from a device connected to the DVI-D terminal, follow the procedure below.

1.Turn on power of this unit.

2.Set the input video source to DVI-D input.

3.Turn on power of the device connected to the DVI-D terminal of the unit (i.e. DVD player).

If the procedure above is not followed, projected image may corrupt.

For the details of the DVI-D terminal on the device connected with the unit, see the instruction manual of the device.

RGB (D-Sub monitor) cable

(commercially available)

RGB out

or

DVI-D out

or

HDMI out

V H R B G

MONITOR OUT

PC

HD-Video / Satellite /

Cable Tuner / DVD Player

Monitor output

RGB OUTout

or

-D out DVI-D out

DVI-D cable (commercially available)

IBM VGA or

Compatible PC

8