ENGLISH
| Config. Menu (PC/HD and Video) |
|
| PIP Configuration Menu |
|
|
|
|
|
|
|
Press MENU to open the OSD menu. Press 34 to move to the Config. menu and press | Press | ||||
ENTER. Press 34 to move up and down in the Config. menu. Press 1 2 to adjust values and | down in the PIP Configuration menu. | ||||
press ENTER to confirm the setting. |
|
|
| ||
ITEM |
| DESCRIPTION | DEFAULT |
H Keystone | Press 1 2 to adjust the horizontal keystone. | 0 | |
| (Range: |
| |
V Keystone | Press 1 2 to adjust the vertical keystone. | 0 | |
| (Range: |
| |
Menu Position | Press 1 2 to select the menu screen position. | 4 | |
| (Range: 1 (upper left) — 9 (bottom right) |
| |
Menu Timer | Press 1 2 to select how long the menu is displayed. | Continue | |
| (Range: Continue (OSD appears until manually closed) |
| |
| — 10 Sec. — 20 Sec.) |
| |
Language | Press 1 2 to change the language. | English | |
| (Range: English; Français; Italiano; Deutsch; Español) |
| |
Installation | Press 1 2 to choose from four projection methods: | Front | |
| Front | Desktop mount, front of screen |
|
| F+Ceiling | Ceiling mount, front of screen |
|
| Rear | Desktop mount, rear of screen |
|
| R+Ceiling | Ceiling mount, rear of screen |
|
Auto Input | Press 1 2 to enable/disable Auto Input Detection. | Disable | |
Detection | Note: When this setting is disabled, you need to select |
| |
| the source manually. |
| |
Auto Power Off | When the Auto Power off is set to Enable, power to the | Disable | |
| projector automatically shuts off if no signals are received |
| |
| and no operations are performed for about 10 consecutive |
| |
| minutes. |
|
|
Reset | Resets all items in the config. menu to the default values. | — | |
20
ITEM | DESCRIPTION | DEFAULT |
PIP input | Press 1 2 to select the PIP input. | *1 |
PIP Horizontal Shift | Press 1 2 to adjust the horizontal position of the PIP window. | |
|
| |
PIP Vertical Shift | Press 1 2 to adjust the vertical position of the PIP window. | |
|
| |
PIP Window Size | Press 1 2 to adjust the size of the PIP window. | *1 |
|
| |
Information: | *1 The default value depends on input signal. | |
|
| |
PIP operations may not function depending on the combination of input signals. See the table below for details.
O: support | X: Not support |
|
|
|
|
|
|
|
| |
PIP Source |
|
|
| Main Input Source |
|
|
| |||
| COMP.1 |
| COMP.2 | VIDEO | RGB | DVI | ||||
|
|
| YPbPr | SCART | RGB | |||||
COMP.1 |
| YPbPr | X | X | X | X | X | X | O | O |
| SCART | X | X | X | X | X | X | O | O | |
|
| RGB | X | X | X | O | O | O | X | O |
COMP.2 | X | X | O | X | X | X | O | O | ||
X | X | O | X | X | X | O | O | |||
VIDEO | X | X | O | X | X | X | O | O | ||
| RGB | O | O | X | O | O | O | X | X | |
| DVI | O | O | X | O | O | O | X | X | |
Information Menu
Press Info. to open Information menu. The Information menu items are displayed only.
ITEM | DESCRIPTION | DEFAULT |
Input | Displays the select input source. | These |
|
| items are |
Resolution | Displays the resolution and H/V in PC mode. | display |
| Displays the color standard of the connected video device. | only. |
Lamp Hour | Number of hours lamp has been in use. |
|
