The Screen Images in a 4:3 screen
•Press the NORMAL button on the remote controller for the 4:3 aspect ratio video source.
•Press the FULL button on the remote controller for 16:9 aspect ratio video source, such as 1080i, 1035i, and 720p video systems.
•Press the FULL, ZOOM 1 or ZOOM 2 button on the remote controller for the squeezed video source.
❖Original Source Image
16 : 9 video source | 4 : 3 video source |
To Turn off the Power
1.Press the STANDBY button on the remote controller. The projector turns off.
2.The fan continues running for about 1 minute to internally cool the projector. In the meantime, the Power LED on the projector flashes a blue color and buttons on the remote control are irresponsive to touch. Once the fan stops, the Power LED blinks (blue) slowly to indicate the projector is on standby.
3.Turn off the main power switch.
ENGLISH
❖Full mode
The 16:9 squeezed image is displayed with the correct aspect.
❖Normal mode
❖Zoom 1 mode
❖Zoom 2 mode
The 4:3 image is enlarged horizontally.
The picture in normal ratio 4:3 is displayed.
STANDBY |
|
| ON |
COMP.1 | COMP.2 | S VIDEO | FULL |
C1 | C2 | S | F |
DVI | RGB | VIDEO | NORMAL |
DV1 | RGB | V | N |
THEATER STANDARD DYNAMIC ZOOM1
THTR STD DYN Z1
LB HB CT Z2
Notes :
-Do not pull out the AC power cord until the projector turns in standby mode.
-Do not pull out the power cord suddenly in the state of “POWER ON." It can cause a breakdown.
-When a error message blinks, turn off the main power switch after checking that the fan has stopped.
-The projector will not be turned on if the ON button on the remote controller is pressed immediately after turning off. Press the ON button on the remote controller after the projector turns into standby mode.
13
