3 INSTALLATION
ANCHORING TO CONCRETE PAD
The concrete pad should be level, and a minimum of 3000 PSI concrete, steel reinforced, 150mm thick. Anchor baler to floor using anchor brackets on sides of baler base. Two 18mm diameter anchor bolts required, Red Head type recommended.
1. Roll baler to the desired location.
2.Unbolt the Anchor Bracket from the baler. (both sides)
ANCHOR BRACKET IN
SHIPPING POSITION
3.Turn the Anchor Brackets over and
4.Anchor the Anchor Bracket to the floor. (both sides)
TURN ANCHOR BRACKET
OVE AND ANCHOR TO
FLOOR
