Maretron 1.4 FPM100 Accessories, Quick Install, FPM100 User’s Manual, Page, Revision

FPM100 User’s Manual

o16 programmable tank types including Fuel, Fresh Water, Waste Water o Programmable tank number(s) up to 16 per tank type

o Programmable tank capacity

1.4FPM100 Accessories

Maretron offers the following accessories for the FPM100:

•PT-V-0-1BAR-01 Pressure Transducer Vacuum to 1 Bar (14.5 PSI)

•PT-0-3PSI-01 Pressure Transducer 0 to 3 PSI (0.21 bar)

•PT-0-5PSI-01 Pressure Transducer 0 to 5 PSI (0.34 bar)

•PT-0-10PSI-01 Pressure Transducer 0 to 10 PSI (0.69 bar)

•PT-0-50PSI-01 Pressure Transducer 0 to 50 PSI (3.45 bar)

•PT-0-100PSI-01 Pressure Transducer 0 to 100 PSI (6.89 bar)

•PT-0-300PSI-01 Pressure Transducer 0 to 300 PSI (20.68 bar)

•PT-0-500PSI-01 Pressure Transducer 0 to 500 PSI (34.47 bar)

•PT-0-1000PSI-01 Pressure Transducer 0 to 1000 PSI (68.95 bar)

•PT-0-3000PSI-01 Pressure Transducer 0 to 3000 PSI (206.84 bar)

•PT-0-5000PSI-01 Pressure Transducer 0 to 5000 PSI (344.74 bar)

• PT-SNUB-01 Pressure Snubber

WARNING

Maretron pressure transducers are not approved for use with gasoline. If you wish to use the FPM100 to monitor pressures or levels of gasoline, you must obtain a pressure transducer that is approved for use with gasoline.

1.5 Quick Install

Installing the Maretron FPM100 involves the following steps. Please refer to the individual sections for additional details.

1.Unpack the Box (Section 2.1)

2.Choose a Mounting Location (Section 2.2)

3.Mount the FPM100 (Section 2.3)

4.Connect the FPM100 (Section 2.4)

5.Configure or Program the Mode for each Channel (Section 3.1)

6.For each channel in Pressure/Vacuum mode:

oSet the channel’s instance (Section 3.2.1)

oSet the channel’s source (Section 3.2.5)

oConfigure the Pressure at 4mA (Section 3.2.3)

oConfigure the Pressure at 20mA (Section 3.2.4)

7.For each channel in Tank mode:

oConfigure or Program the Tank Type (Section 3.1)

oConfigure or Program the Tank Number (Section 3.3.6) o Configure or Program Tank Capacity (Section 3.3.4)

Page 2 Revision 1.3