Mark Levinson 532 owner manual Internal Web Page

Nº532 Power Amplifier

Internal Web Page

To Connect Using a Router:

Router

No532 Computer

1.Connect a network cable between the router and the Ethernet port on the rear panel of the Nº532.

2.Attach a second network cable between the router and the Ethernet port of the computer.

To Connect Without a Router:
To connect the Nº532 directly to the computer, you must use a
network crossover cable. Different from a standard network
cable, the crossover cable is designed to connect network access
ports directly together without a hub, router, or switch.			13
	Crossover
	Cable
No532		Computer

Connect the crossover cable between the Ethernet port on the rear panel of the Nº532 and the Ethernet port of the computer.

When connected to a computer, the Nº532 has an internal Web page that provides access to:

•Network Setup – allows the user to modify the network setup parameters. Accessing the internal Web page is the ONLY way to modify the network setup parameters of the Nº532 amplifier.

•Status Information – provides basic status information for the Nº532.

•Error Reporting – tracks system-related error messages for the Nº532. This page is a diagnostics tool for Mark Levinson Customer Service use.

The Nº532 MUST be connected to a computer via the Ethernet port before you can access the internal Web page.