Mark Levinson 532 owner manual Specifications

Nº532 Power Amplifier

	Specifications
	All specifications are subject to change without notice.
Input & Output Connectors	• two balanced XLR inputs
	• two unbalanced RCA inputs
	• two “Hurricane” loudspeaker outputs with banana-plug sockets
		(banana-plug socket not available on the 230 VAC models)
Control Connectors	•	two Link2 ports
	•	one Ethernet port
	• one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc
	• one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc
	• 3-pin IEC standard power connector
Rated Output Power	20Hz to 20kHz at <0.5% THD, 400W per channel @ 8 Ω,
	full output from 2.59Vrms
Frequency Response	within 0.1dB from 10Hz to 20kHz
Signal-to-Noise Ratio	>85dB, reference level: 2.83 Vrms
Input Impedance	100 kΩ (balanced); 50 kΩ (unbalanced)
Voltage Gain	26.8dB		27
Input Sensitivity	2.83Vrms output at 130mVrms input
Output Impedance	<20 mΩ, 20Hz to 20kHz
Power Requirements	100V∼, 120V∼, 230V∼, 800W, factory set for destination country
Dimensions	• Height (with feet): 9.55 in (242.57mm)
	• Height (without feet): 8.75 in (225.25mm)
	• Width: 17.5 in (444.50mm)
	• Depth: 21.1 in (535.85mm)
Weight	• Net weight: 121.5 lbs (55.22kg)
	• Shipping weight: 129.5 lbs (58.86kg)
Operating Environment	• Operating temperature: 0o to 35oC (32o to 95oF)
	• Storage temperature: –30oto 75oC (–22oto 167oF)
	• Relative humidity: 95% maximum without condensation