ML Net and Link2

Mark Levinson

A system can use ML Net and Link2 together, but the Link2 control has priority. Status requests and notifications are still sent to the ML Net master device, but commands sent by the ML Net master device are ignored as long as Link2 is connected.

Note While ML Net is active from initial power-up, Link2 doesn’t activate until the Master device is put into Standby mode (after initial power up). As a result, the amplifier can react initially to ML Net commands even though Link2 is connected.

Link2

 

MASTER

 

COMMUNICATION

 

PORT

 

AMPLIFIER

22

SLAVEªIN SLAVEªOUT

AMPLIFIER

SLAVEªIN SLAVEªOUT

AMPLIFIER

SLAVEªIN SLAVEªOUT

AMPLIFIER

SLAVEªIN SLAVEªOUT

The Nº532 uses 8-to-8 link cable.

Older products use 8-to-6 cable.

The main purpose of the Mark Levinson Link2 protocol is to allow a single “Master” device to control other “Slave” devices. Refer to the product documentation of each Mark Levinson product to verify compatibility and cabling requirements.

To use Link2, all devices are daisy-chained together using Ethernet cables, as demonstrated in the figure on the left. Each “chain” can have only one master device; all other devices in the chain become slaves. Slave devices receive and respond to the commands of the master device. The Nº532 amplifer is always a Slave device.

Ensure that all components are powered off before connecting the Link2 ports and ensure that there are no audio sources active. Once connected, power on the linked components one at a time to ensure proper functioning of the Link2 controls. The Master device must be powered on first.

Allow each component to complete the initialization sequence before proceeding to the next component. When all components have been powered on, put the master device into Standby mode again. Link2 does not activate until the master device is put into Standby mode (after initial power up). Verify that the front panel Standby LEDs on the linked components are blinking in unison.

The Nº532 slave(s) can perform the following Link2 functions:

•Synchronized LEDs – the Standby LED of the Nº532 blinks in unison with the master device.

•Standby Link – the master device controls the Standby state of the Nº532 amplifier.

•Fault Condition Reporting – if the Nº532 experiences a fault condition, the fault is reported on the master device.

Page 25 Page 27
Page 26
Image 26
Mark Levinson 532 owner manual ML Net and Link2
Page 25 Page 27

532 specifications

The Mark Levinson No. 532 is a high-performance power amplifier that exemplifies the best in audio technology. Renowned for delivering unparalleled sound quality, the No. 532 combines advanced engineering with state-of-the-art components to create an audio experience that meets the demands of audiophiles and professionals alike.

One of the standout features of the No. 532 is its robust power output. Properly equipped to deliver up to 300 watts per channel into 8 ohms, and even more into lower impedances, this amplifier ensures that it can drive a wide range of speakers with ease. This impressive power performance is complemented by its class AB topology, which strikes an optimal balance between efficiency and sound fidelity, providing listeners with rich, full-bodied audio reproduction across all frequencies.

The No. 532 showcases Mark Levinson's hallmark meticulous craftsmanship. The unit is built using premium-grade materials, featuring a solid chassis that minimizes resonance and external interference. The elegantly designed exterior houses advanced circuitry, including a fully balanced design that reduces noise and distortion, allowing the amplifier to deliver crystal-clear sound.

Incorporating proprietary technologies, the No. 532 employs the Mark Levinson's custom-built output devices and a sophisticated power supply that guarantees steady performance and dynamic audio reproduction at any volume level. Additionally, the amplifier features an intelligence-driven thermal management system, ensuring optimal performance while preventing overheating during extended use.

User-friendly features enhance the listening experience further. The No. 532 includes multiple inputs, facilitating seamless integration into various audio systems. It also has an intuitive interface that allows users to monitor performance and make adjustments with ease.

Finally, the Mark Levinson No. 532 amplifier is not just about raw power; it excels in sound transparency and detail. It delivers an expansive soundstage, allowing listeners to experience audio as intended by the creators, capturing the subtleties of every instrument and vocal nuance. This makes the No. 532 a cornerstone choice for those committed to experiencing music in its most accurate form.

In conclusion, the Mark Levinson No. 532 stands out for its superior build quality, exceptional power capabilities, and advanced technological features, ultimately providing an audio performance that is both profound and engaging. Whether for personal enjoyment or professional use, this amplifier is designed for those who demand the finest in high-fidelity audio.
Top Page Image Contents