Mark Levinson 532 Installation Considerations, Product Registration, Unpacking, Placement and

	Mark Levinson
Product Registration	Register your Nº532 online at www.marklevinson.com within 15
	days of purchase. Retain the original, dated sales receipt as proof of
	warranty coverage.
	Installation Considerations
	The Nº532 dual monaural power amplifier requires special care
	during installation to ensure optimal performance. Pay particular
	attention to instructions included in this section and to precautions
	included throughout this owner’s manual.
Unpacking	DO save all packing materials for possible future shipping needs.
	DO inspect the Nº532 for signs of damage during shipment. If
	damage is discovered, contact your authorized Mark Levinson
	dealer for assistance in making appropriate claims.
	DO locate and remove the accessory bag from the carton. Make
	sure it contains all of the items listed in the “What’s in the Box”
	table on the previous page. If not, contact your authorized Mark
	Levinson dealer.
4
	DO NOT attempt to lift or move the No532 power amplifier
Caution!
	without adequate assistance. The shipping weight of the No532
	exceeds what a single person should lift alone. To avoid injury or
	damage to the No532, at least two people are required to lift or
	move the amplifier.
	Two pairs of knit white gloves with special gripping surfaces on
	the palms and fingers are included with the No532 . Wear these
	gloves when lifting or moving the amplifier.
Placement and	DO install the Nº532 power amplifier on its own shelf for proper
Ventilation	ventilation.
	DO install the Nº532 chassis on a solid, flat, level surface.
	DO install the Nº532 power amplifier close to associated
	components to keep interconnecting cables as short as possible.
	DO select a dry, well-ventilated location out of direct sunlight.
	DO allow at least 3 to 4 inches (8 to 10cm) of clearance above and
	on each side of the amplifier for proper heat dissipation.