Manuals / Mark Levinson / Home Audio / Stereo Amplifier

Mark Levinson N32 owner manual Unpacking, 1wrist strap for ESD protection 15⁄32 hex key

Models: N32

1 34

Download 34 pages 11.62 Kb

Page 10

Unpacking

Warning!

unpacking

10

Unpacking

Do not attempt to use your Nº32 Reference Phono modules unless your Nº32 Controller is using version

1.03(or greater) of its operating software. Prior to installation, check your software by pressing Setup and turning the Select knob one click to the left, and reading the resulting display.

If you need new software, please contact your authorized Mark Levinson dealer.

Unpack your Nº32 Reference Phono Preamplifier modules and keep all packing materials for future transport. Locate and remove all accessory items from the shipping carton. Accessories include:

1wrist strap for ESD protection

15⁄32" hex key

17⁄64" hex driver

15⁄64" hex driver

210-32 socket head cap screws

You will also need the 3⁄32" hex driver that came with your Nº32 Refer- ence Preamplifier in order to open the main Preamplifier unit.

Image 10

Mark Levinson N32 owner manual Unpacking, 1wrist strap for ESD protection 15⁄32 hex key, 17⁄64 hex driver 15⁄64 hex driver

Contents

Nº32 Reference Phono Modules Madrigal Audio LaboratoriesRISK OF ELECTRIC SHOCK DO NOT OPEN NOT REMOVE COVER. NO USER-SERVICEABLEPARTS INSIDENOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE REFER SERVICING TO QUALIFIED PERSONNELImportant Safety Instructions Page Table of Contents modular approach input connections 6 input loading networkthe use of the critical preamplifier circuits NC 8 instrumentation amplifier topologyNC high accuracy RIAA equalization DC servo stabilized component selection17⁄64 hex driver 15⁄64 hex driver Unpacking1wrist strap for ESD protection 15⁄32 hex key 210-32socket head cap screwsOperating Voltage 12Warning 1 - Nº32 reference preamplifier 4.Slide top cover back slightly then up and off resulting in… this all four connections closeup Customizing Your Nº32 20 configuring phono inputs Sw 1.07 1.02 the software version numbersnaming a phono input setting the phono gain setting line gain 22 setting the offset setting the balance setting the 20 Hz filter setting the resistive loadsetting the capacitive load Installing a Custom Load 1.Lift connector end of cable out of hole in shield box if needed 5.Loosen each gold thumb screw a few turns 10.Re-installtop cover screws Care and Maintenance damage to electronic components within the unitU.S. and Canadian Warranty Obtaining Service Specifications Madrigal Audio Laboratories, IncInstallation Notes Middletown, Connecticut 06457 USA Telephone Madrigal Audio Laboratories, Inc2081 South Main Street, P.O. Box MADRIGAL AUDIO LABORATORIES