Mark Levinson N32 owner manual this

Warning:

16

this , not

The cables must lie flat against phono preamp top cover to slide in to Nº32 preamp.

8.Gently slide the left phono preamp module into the open- ing in the left channel of the Nº32 preamp. Repeat for right channel.

Do not force! The phono preamp modules should slide in easily. If a phono preamp module does not slide in easily, remove it and repeat step 7.

9.Reinstall the four screws that were removed from phono option cover plate (7⁄64” hex key)

Please take care to avoid cross-threading these relatively small screws.

10.Install two 10-32 socket head cap screws into floor of Nº32 Preamplifier, through the mounting tabs in the phono preamp modules. (5⁄32” hex key)

These are the relatively heavy-duty screws that were supplied with your Nº32 phono modules. The floor of the Nº32 has threaded inserts waiting to accept these screws.