Mark Levinson N32 owner manual Specifications, Madrigal Audio Laboratories, Inc

32

Specifications

The correlation between published specifications and sonic quality is unreliable. A list of numbers reveals virtually nothing. All technical measurements must be subject to qualitative as well as quantitative interpretation.

Measurements of the Nº32 yield excellent results by any standards. However, only those specifications that apply to its actual operation are included here.

■Frequency response:

	RIAA response	±0.1 dB
	RIAA/IEC response	+0.1, -0.3 dB
■	Gain:	either 40 or 60 dB
■	THD + N:
	2V out, 1 kHz test signal, 80 kHz measurement bandwidth	less than 0.008%

■Residual noise

	ref to output w/500∝V, 1 kHz at input, unweighted:			-69 dB
■	Input connectors:		2x Madrigal RCA per channel,
	Input impedance:		or 2x Neutrik XLR per channel
■				(user selectable)
	Resistive:	3.3Ω, 5Ω, 7.7Ω, 10Ω, 33Ω, 50Ω, 77Ω, 100Ω, 330Ω, 47kΩ
	Capacitive:	0pF, 50pF, 100pF, 150pF, 200pF, 250pF, 300pF, 350pF, 0.01∝F

Gold-plated, solderless terminals are available for user-installed load value, inside phono module.

■Input overload:

1kHz, 60 dB gain:	16mV on XLR, 8mV on RCA
1kHz, 40 dB gain:	160mV on XLR, 80mV on RCA

For more information, see your Mark Levinson dealer, or contact:

Madrigal Audio Laboratories, Inc.

P. O. Box 781

2081 South Main Street

Middletown, Connecticut 06457 USA

phone	(860) 346-0896
fax	(860) 346-1540
internet	www.madrigal.com