
No30 Mark Levinson Reference Digital Audio Processor
No30.5 Mark Levinson Reference Digital Audio Processor
No30.6 Mark Levinson Reference Digital Audio Processor
No35 Mark Levinson Nº35 Digital Audio Processor
No36 Mark Levinson Nº36 Digital Audio Processor
No36S Mark Levinson Nº36S Digital Audio Processor
No360 Mark Levinson Nº360 Digital Audio Processor
No360S Mark Levinson Nº360S Digital Audio Processor
No39 Mark Levinson Nº39 CD Processor
changing input names To change an input name, use the setup menu:
•press setup to enter the setup menu
•press enter or turn the select knob to move to Inputs
•press enter to move to Input 1
•turn the select knob (or use the select buttons on the remote) to move to whatever input you want to edit
•press enter (Note that enter will either take you down to the next “lower” level in the menu, or if you are at the bot- tom level of the “branch” of the menu you are on, it will
allow you to edit that item. Having changed the item, you can then save the change by pressing enter again.)
30• choose the name you want from the list, using the volume knob (or use the volume buttons on the remote)
If this seems a little complicated when you read about it, just try it on the Nº383 itself, referring to the menu system on page 29. It really becomes intuitive quite quickly.
input programming tip You can take advantage of a shortcut to the settings of the specific input to which you are currently listening. By pressing and holding the setup button on either the remote control or the front panel for a few seconds, you will be taken directly to the first menu item for that particular input (its name). You may change anything pertaining to that input, and when you leave that level of the menu (by pressing setup again), you will leave the menu system entirely.
factory default The factory default names for the inputs are the somewhat generic IN-
input names PUT 1 through INPUT 5. This makes it easy to tell what connectors correspond to what input, but you may find the system easier to use once you have customized the names to reflect the actual components you have connected.