INTRODUCTION
21.Square the door to the unit by raising or lowering the hinge side of the door, keeping the latch centered with the striker.
22.22. Visually inspect the door. Be sure that the door is square to the unit, the striker is centered with the latch, and the gasket is in contact with the entire lip of the cooking compartment.
23.23. Gently open the cooking compartment door, tak-
ing care not to move it out of position.
24.Tighten all 4 door hinge bracket mounting screws.
25.Close and visually inspect the door again, as de- scribed in step 22.
26.Reinstall the left and right side panels, using the screws for each panel.
Fig. 3 Supplemental Wire Sheet
4
