9.Problems and solutions
No picture, no sound. |
| a. Check that all cables are correctly connected. | |
|
|
| b. Check that the channel has been set correctly. |
|
|
| c. Check that the test pattern is received correctly. |
The picture is far too bright. |
| Check that the jumper switch has been correctly | |
|
|
| connected. |
The picture is far too dark. |
| Check that the jumper switch has been correctly | |
|
|
| disconnected. |
Interference with other channels. | Select a different channel, preferably the middle channel | ||
|
|
| of 3 empty channels in the band. |
Sound is distorted. |
|
| Turn down the volume on the connected appliance. |
Infrared does not work. |
| a. Check that the infrared eye is in the correct position | |
|
|
| on the sensor. |
|
|
| b. Check that the metal part of the infrared receiver is |
|
|
| correctly connected. |
|
|
| c. Check that the aerial wall outlets, aerial amplifiers |
|
|
| and splitters that are fitted IN the cabling between |
|
|
| your bedroom and living room are "return channel" |
|
|
| compatible (5 - 30 MHz). |
|
|
| |
10. Technical details |
| ||
System: | PAL B/G |
| |
Input: | Video, Audio L+R (stereo carrier wave 5.5 – 5.742 MHz) | ||
Output level: | 82 dBµV at 75Ω | ||
Freq. Range: | UHF: 470 – 862 MHz | ||
| Channel 21 - 69 | ||
| Band III + | ||
Input connection loss: | < 1.5dB @ 800 MHz | ||
Infrared reception: | ≤ 40 kHz |
| |
Audio carrier wave: | 5.5 and 5.742 MHz | ||
Audio frequency range: | 50 – 15 kHz | ||
Supply voltage: | DC 9V / 300 mA | ||
Dimensions (mm): | 85.8 x 68.4 x 21.3 | ||
Modulation method: | Double sideband modulation | ||
MEGAVIDEO55tm | 9 |
