Marmitek 20245/20080129 Quick Start, Connecting directly to a TV, Example of a typical setup

Connecting directly to a TV

1.Plug the Scart cable into the corresponding input on your TV.

2.Plug the other end of Scart cable into the Connect 236 Scart output.

3.Plug your DVD Player, VCR, Satellite Receiver and Game Console, etc. into any of 5 Scart inputs on the back of the scart switcher.

			OUTPUT
		SCART	SCART (COMPOSITE VIDEO)	COMPOSITE
		(RGB)		VIDEO
	SCART (RGB)	YES	YES	YES
INPUT	SCART (COMPOSITE VIDEO)	NO	YES	YES
	COMPOSITE VIDEO (Ch6)	NO	YES	YES

QUICK START

Example of a typical setup

The Connect 236 has been designed to connect up to six separate AV devices and output their Audio/Video signal on the TV / Hi-Fi. Each device can be selected independently of each other. Once a device has been connected, there is no need to remove any of the cables when selecting an input.

1.Press the Power button to On

The back light of the LCD will fade in and the Connect 236 Scart switcher enters the operation mode.

Press the button again and the back light of the LCD will fade out and the Connect 236 Scart switcher will switch off.

2.Press the < or > button to select a Channel The LCD shows CH1, CH2, CH3, CH4, CH5 or CH6.

8 © MARMITEK