SPA MAINTENANCE
SCHEDULE
DAILY
•Replenish the water level by filling 2/3 up the Vortex skimmer opening(s). (See STARTING YOUR SPA section.)
•Check the water balance. Adjust as needed.
WEEKLY
•Wipe down the embossed tile.
•Remove the filter cartridge(s) and rinse thor- oughly with a hose and
MONTHLY
•Soak the filter cartridge(s) in Marquis Spa Care™ ▶ Filter Revive. Rinse thoroughly in clean water.
•Clean the spa Safety Energy Cover with Marquis Spa Care™ Cover Cleaner.
EVERY THREE MONTHS
•Drain the spa and completely refill with water and replenish the chemicals. (See
DRAINING AND REFILLING YOUR SPA.)
•Open the equipment door and check for signs of water leakage around the pump(s). Pump seals will wear out over time, especially with improper water chemistry. Early detection of pump seal failure can significantly reduce repair costs.
•While the spa is drained, the DuraShell® interior can be sponged with a spa cleaner and rinsed.
NOTE: Do not wax the surface as the wax will dissolve into the water, clog the filter, and reduce the effectiveness of Microban® antibacterial product protection.
EVERY SIX MONTHS
• If your spa has a wood exterior, treat the wood with the Super Deck Wood Care Kit.
NOTE: Do not use wood sealant. Use only a
page 19
