SPA
MAINTENANCE (CONTINUED)
Dura Base™ External Drain and Fill Valve |
|
1. Remove plug from the external Drain and Fill valve. | ▶ |
2. Attach a hose to the external drain and fill valve |
|
on the DuraBase™. A Fill Filter is recommended |
|
when filling. Attach to the end of a garden hose |
|
to filter out any grit and sediment that may |
|
accumulate in the spa and potentially scratch the |
|
spa surface during the process. |
|
3. Open the valve by turning the ring counter- |
|
clockwise. Gravity will cause the water to drain |
|
out of the hose. |
|
4. When the spa is empty, close the valve by |
|
turning the ring clockwise and remove the hose. |
|
5. Replace the plug in the drain and fill valve. |
|
6. Follow step five above to refill your spa. |
|
CLEANING THE SPA AND SAFETY ENERGY COVER
Should the DuraShell® interior become soiled, it can be cleaned with a soft sponge, cloth Scumbug Duramitt #6875 or Tub Scrubber #6000. Do not use any abrasive cleaners as they can scratch or dull the spa surface.
Your Safety Energy Cover can be cleaned with Marquis Spa Care™ Cover Cleaner on both top and bottom sides. Marquis Spa Care™ Cover Cleaner is a good quality NON- SILICONE based vinyl restorer that will help protect the surface from the sun’s rays.
REMOVING THE FILTER
Refer to the SPA MAINTENANCE SCHEDULE section for cleaning instructions. Follow these instructions when performing routine maintenance.
Vortex Filtration:
1.Grasp the edge of the
2.Use the filter handle and turn the filter cartridge counterclockwise to unscrew it from its base.
3.Lift out the filter cartridge. ▶
Maintenance Reminder will show CL every 30 days to remind you to clean your filter. Use Marquis Spa ▶ Care™ Filter Revive and Filter Soak Canister. It’s recommended that you keep a spare filter on hand for cleaning. Replace your filter once a year. Filters are available through Marquis Essentials.
REINSTALLING THE FILTER
Repeat the steps above in reverse order to reinstall the filter. Do not overtighten the filter as it may cause failure of the filter cartridge. When replacing the Vortex filter top, center the top over the raised
filter ring, and press down firmly until the top snaps into place.
page 17
