TROUBLESHOOTING
YOUR SPA | (CONTINUED) |
SPA WATER MAINTENANCE (CONTINUED)
SCUM LINE IN SPA
C: Body oils and dirt.
S:Use Spa Perfect once a week to break down oils and lotions to prevent scum from forming.
FAILURE TO GET A SANITIZER READING ON TEST STRIP C: Sanitizer level is too low.
S: Add chlorine or bromine until the sanitizer tests in the recommended range.
C: Algae present.
S:Dirty water will consume the sanitizer as soon as it is added. Add more chlorine or bromine until the sanitizer tests and stays in the recommended range.
C: Test strip remains white even after sanitizer has been added.
S:Sanitizer level is extremely high. It can bleach the reagents on the test strip and give a false reading. See below.
TOO MUCH SANITIZER IN THE WATER
C: Too much chlorine or bromine added or dispensed into the spa.
S:Remove Safety Energy Cover and activate
EYE OR SKIN IRRITATION
C: Contaminants or excessive amount of chloramines/bromamines in water.
S: Shock water with Shock Treatment. Adjust sanitizer level.
C: pH level is low.
S: Adjust pH level as needed.
CORROSION OF METAL
C: Low pH level.
S:Adjust pH level with pH and Alkalinity Increase.
GREEN WATER/ALGAE
C: Low sanitizer level or high pH.
S: Adjust pH and sanitizer as necessary.
ERRATIC pH TEST COLOR
C: Sanitizer level is too high. (See TOO MUCH SANITIZER IN THE WATER)
S: Test pH again when sanitizer level is below 5 ppm.
MARQUIS SPA CARE™ PRODUCTS
•Bromine | •FilterRevive | •pH and Alkalinity Increase |
•CalciumHardness Increase | •FoamEliminator | •ShockTreatment |
•ChlorineSanitizer | •Metal and Stain Control | •GoBrom |
•CrystalClearClarifier | •pH and Alkalinity Decrease |
|
page 23 |
|
|