![](/images/new-backgrounds/1300481/30048123x1.webp)
Changing the IP Address of the NCB-1004 (continued)
Procedure (continued)
8. The following file information should appear:
9.This file must be edited to save the new IP address. Use the following commands to edit the file. Edit only the numbers. Do not press the enter key after each command.
To move the cursor, use arrow keys or the following keys:
hleft
lright
jdown
kup
To edit the text, use the following keys:
xdelete single character under cursor
rreplace single character under cursor with single character
iinsert characters before cursor (press esc when finished typing)
a insert characters after cursor (press esc when finished typing)
Save the file and exit the file editor using the following commands:
ZZexit and save changes
:q! exit without saving changes
:w save file without exiting
10. Be sure to note the new IP address. Reboot the
12