Marshall electronic NCB-1004 System Configuration, Basic Remote Control of IMD Monitors

System Configuration

Overview

The NCB-1004 can be used in three different system configurations. The following diagrams show the different configurations:

Basic Remote Control of IMD Monitors

■Overview

Use the following configuration for basic remote control of Marshall IMD series monitors. This setup allows remote control of all features in the on-screen menu of each IMD monitor.

■Wiring Diagram

Use the following configuration for basic remote control of Marshall IMD series monitors.

Ethernet Cable to

Network Connection

PC

Network

Use second RS-422 jack on each monitor to daisy-chain multiple monitors.

on NCB-1004

Connect monitors to RS-422 Outputs on Marshal IMD Monitors. Use up to 4 RS-422 outputs on NCB-1004.

Use 6P6C Modular Cable, wired pin-to-pin.

Connect up to 128 IMD screens per RS- 422 output

Marshall	Marshall
IMD	IMD

Marshall	Marshall
IMD	IMD

Marshall	Marshall
IMD	IMD

Marshall	Marshall
IMD	IMD

Marshall	Marshall
IMD	IMD

Marshall	Marshall
IMD	IMD

■Monitor Configuration

The following settings are required on each IMD monitor:

IMD Protocol:	MEI
IMD Baud Rate:	57600
ID#:	Each monitor must have a unique ID# for remote control of individual monitors.

13