Marshall electronic NCB-1004 operating instructions Web Interface, Target Monitor

Web Interface

Overview

The web interface is used to operate the NCB-1004. Once the NCB-1004 is connected to a network, access the web interface by entering the units IP address in any web browser on any computer on the network. The web interface allows remote control of all on-screen menu features of individual monitors or all monitors connected. The web interface also controls the pass-through of Image Video or TSL protocol.

Target Monitor

The target monitor frame is always visible at the top of the NCB-1004 web page:

■Target Monitor

On the right side of the frame, choose which monitors to address:

oWhen the “All/Global” option is selected, all comm ands will be globally sent to all IMD monitors connected to the NCB-1004.

oWhen the “Address” option is selected, all commands will be sent only to the IMD monitor with the ID# in the adjacent field.

Note that to control individual monitors, each monitor must be pre-assigned a unique ID#. Also note that GET commands do not work in “All/Global” mode.

■Protocol Pass-Through Status

On the right side of the frame, two windows show the protocol pass-through status:

oThe first window displays “Image Video Protocol” or “TSL 4.0 Protocol,” according to which protocol is selected for pass-through in the OSD Configuration & IMD page.

oThe second window displays “Pass-Through: ON” or “ Pass-Through: OFF,” according to the pass-through setting in the OSD Configuration & IMD page.

16