Marshall electronic QV171-HDSDI operating instructions Status Display, Time Code

On-Screen Menu (continued)

OSD CONFIGURATION SUBMENU (continued)

■Status Display

Use this setting to enable or disable status display. When enabled, the current video input standard is displayed on the top left of the screen. When disabled, status is only displayed for 2 seconds when the monitor is powered on, when an input is applied, or when the input video standard changes. The status display reads “No Input” when no video input is present.

Status Display

■Time Code

Use this setting to enable time code display on the screen. Time code is de-embedded from the vertical ancillary data (VANC) within the SDI signal. Two types of time code can be selected to display on the screen: LTC (linear time code) or VITC (vertical interval time code).

The position of the time code display varies based on the aspect ratio setting and presence of IMD text (see Aspect

Ratio diagrams on page 14).

Hours Minutes Seconds Frames

00:00:00:00

Time Code display

18