Marshall electronic V-R151DP-AFSD manual System Configuration Submenu, Internal SMPTE Color Bars

On-Screen Menu (continued)

SYSTEM CONFIGURATION SUBMENU

Video Configuration Submenu

■Internal SMPTE Color Bars

Use to display internally generated SMPTE split-field color bars.

■User-Definable Function Buttons

Use the FUNCTION 1 and FUNCTION 2 menu items to define each function button on the front panel of the monitor. The following options are available for each button:

• DELAY		Enable and rotate amongst delay modes.
•	RATIO	Toggle between 4:3 and 16:9 aspect ratios.
• BACK		Rotate amongst marker backgrounds.
• CENTER		Enable/disable center marker.
•	MARKER	Enable and rotate amongst marker settings (choices depend on aspect ratio setting).
• MONO		Enable/disable monochrome mode.
•	CTEMP	Rotate amongst color temperature settings.
•	PTP	Enable/disable Pixel-to-Pixel™ mode.

FUNCTION 1 is set to RATIO by default.

FUNCTION 2 is set to PTP by default.

■Status Display

Use to enable on-screen display of input/format status in the upper-left corner of the screen.

■Saving and Loading User Configuration Presets

Use the SAVE CONFIG and LOAD CONFIG menus to save current settings to one of 6 presets, or load a preset. All monitor settings on the monitor are saved, including the image adjustment knob settings.

•Use the LOAD CONFIG menu to load one of presets USR1 – USR6. Factory default settings can also be loaded by selecting MFG. (Factory defaults cannot be overwritten.)

•Use the SAVE CONFIG menu to save the current settings to a preset from USR1- USR6.

14