Marshall electronic V-R151DP-AFHD, V-R151DP-AFSD manual Front Panel Features, Power Button

Front Panel Features

1Power Button

Turn the monitor on by pressing the power button. In the OFF state, the LED will shine brightly. The LED will dim when the monitor is turned on.

2Input Select Buttons

Use the input select buttons to select the input to be displayed:

•Video

•S-Video

•YPbPr (SD/HD)

•VGA

•DVI

•SDI (HD on V-R151DP-AFHD)

Each input automatically detects the applicable formats (See Compatible Input Formats – Page 7).

3On-Screen Menu Navigation Buttons

Use the Menu, ↑, ↓, and Select buttons to display and navigate the on-screen menu (See Main Menu and Navigation – Page 8).

4User-Definable Function Buttons

Two user-definable function buttons can be used for direct access to various settings. Functions are assigned using the on-screen menu (See User- Definable Function Buttons – Page 14).

5Image Adjustment Knobs

Use the image adjustment knobs to adjust the following settings. Pressing each knob will display the current status of the corresponding control:

•Brightness (0-64)

•Color (0-64)

•Tint (0-64) [NTSC Only]

•Contrast (0-64)

6Tally Lights

Three tally LEDs (green, red, and yellow) are provided as general purpose indicators. Each LED can be individually controlled, providing multiple indications. Tally LEDs are controlled via the HD-15 connector on the rear panel (See Tally Interface – Page 6).

1

2

3 4

5

Right Front Panel

6

Top Front Panel

5