Marvel Industries 8SBARE A P P L I A N C E F E At U R E S, Insert Wine Bottles, Roll-outShelves

Models: 8SBARE

1 12
Download 12 pages 19.41 Kb
Page 6
Image 6
A P P L I A N C E F E AT U R E S

A P P L I A N C E F E AT U R E S

5

Insert Wine Bottles

The wine rack roll-out shelf holds ten bottles. See figure 4 for typical wine bottle orientation. Wine rack can be located at the middle or bottom part of the cabinet interior. For red wines, place wine shelf at bottom shelf position in the cabinet. Then put a glass shelf in the next higher position. For white and sparkling wines, put the wine shelf on the middle shelf position in the cabinet. Place the remaining shelves as desired. (See figure 5) Also, there is a fixed, wooden, bottle cradle in the bottom, step section of the cabinet. Six bottles of wine may be stored there.

Loading Tips and Suggestions

The glass shelves and fixed position wire rack are for general beverage storage, such as beer and soft drinks. Opened wine bottles and tall beverage containers may be stored on the glass shelf closest to the cabinet top. Just lift the hinged section of the fixed position upper wire rack to provide clearance for the bottles and/or containers to stand upright.

The wooden, bottom bottle cradle may be removed for storing “jug” wines. Just remove the two screws that secure the cradle to the cabinet floor.

You can store magnum bottles and other large bottles on any of the shelves (except for the top shelf) by removing the shelf directly above them or placing the shelf at a position allowing for proper clearance.

Commodities on the top rack directly under the light will be exposed to a slightly higher temperature when the light is on. REMEMBER TO TURN OFF THE LIGHT WHEN IT IS NO LONGER NEEDED.

Keep wines that you plan to use for everyday drinking and entertaining on the front half of the racks where labels are completely visible. Place wines for aging or longer term storing in the rear.

Roll-out Shelves

The roll-out shelves may be pulled out approximately 14 inches to facilitate loading and retrieval. Do not lean on or press down heavily on the shelves. Doing so may damage the shelves or their contents. Pull out shelves gently and carefully to minimize any possible item shifting. To maintain stability, avoid pulling out more than one shelf at any time.

Wine Rack

Because bottles are not stacked on top of each other, you can easily view and access your inventory without disturbing other bottles. (See figure 6)

Front Bottles (Necks Facing Rear)

Rear Bottles (Necks Facing Front)

 

 

 

 

figure 4

figure 5

figure 6

Page 6
Image 6
Marvel Industries 8SBARE A P P L I A N C E F E At U R E S, Insert Wine Bottles, Loading Tips and Suggestions, Wine Rack