!Warnings:

WARNING: By-products of the combustion of the fuel used by this product con- tain chemicals known to the State of California to cause cancer and reproduc- tive harm.

WARNING: The Department of Transportation Hazardous material Regulations forbid the carriage of butane or other flammable gas products on passenger air- craft. Do not pack this item or any other flammable gas item, in any checked or carry-on baggage.

WARNING: Do not clean or remove the adhesive with solvent. May cause fire. For additional health and safety information, see the product label and Material Safety Data Sheet for the Master Adhesive used.

!Cautions:

CAUTION: Allow applicator to cool to room temperature before servicing. Failure to do so may cause burns.

CAUTION: Do not pull adhesive cartridge from the rear of the applicator while in operation. Removing adhesive from the rear may cause molten adhesive to flow out the rear of the applicator which may cause burns and damage the applicator.

CAUTION: Avoid contact with hot adhesive and the applicator tip. May cause burns. Wear safety glasses and gloves when using.

CAUTION: If molten material comes in contact with skin do not attempt to remove!!! Cool glue with cool water and/or ice as quickly as possible and seek medical assistance if burn is over a large area.

Important Notice: User is responsible for determining whether the Master Glue Gun is fit for a particular purpose and suitable for user’s method of application. Please remember that many factors can affect the use and performance of a Master Glue Gun in a particular application. The materials to be bonded with the product, the surface preparation of those materials, the product selected for use, the conditions in which the product is used, and the time and environmental condition in which the product is expected to perform are among the many fac- tors that can affect the use and performance of a Master Glue Gun. Given the variety of factors that can affect the use and performance of a Master Glue Gun, some of which are uniquely within the user’s knowledge and control, it is essen- tial that the user evaluate the Master Glue Gun to determine whether it is fit for a particular purpose and suitable for the user’s method of application.

Page 1 Page 3
Page 2
Image 2
Master Appliance GG-100 instruction manual
Page 1 Page 3

GG-100 specifications

The Master Appliance GG-100 is a powerful, versatile heat gun designed for a wide range of industrial and DIY applications. Known for its robustness and reliability, the GG-100 provides users with high-performance features that enhance both ease of use and efficiency in various tasks.

One of the standout features of the GG-100 is its adjustable temperature range. With temperatures reaching up to 1,000 degrees Fahrenheit, it enables users to tackle different types of materials and applications with precision. This versatility allows the heat gun to be employed for tasks such as paint stripping, plastic molding, shrink wrapping, and even soldering components in electronics.

The GG-100 boasts two distinct air flow settings, allowing users to control the intensity of the heat being applied. This dual setting not only aids in achieving the desired warmth for specific tasks but also helps prevent damage to more delicate materials. The combination of adjustable temperature and airflow settings is particularly advantageous for professionals needing to switch between tasks swiftly without compromising on performance.

Ergonomically designed, the GG-100 features a lightweight and balanced construction, which minimizes user fatigue during extended use. The comfortable grip ensures that users can maintain control and accuracy, essential for detailed work. Additionally, the built-in thermal overload protection ensures safety, automatically shutting off the unit in case of overheating, thus providing peace of mind during operation.

Durability is another key characteristic of the GG-100. Constructed with high-quality materials, this heat gun is built to withstand the rigors of frequent use in demanding environments. The heating element is engineered for longevity, ensuring that users can rely on the GG-100 for years of consistent performance.

In terms of design, the GG-100 features a compact shape that facilitates easy handling and storage. Its simplicity and ease of operation make it an ideal choice for both seasoned professionals and amateurs alike. Coupled with accessories such as nozzles for directing airflow, the GG-100 adapts easily to various applications.

In conclusion, the Master Appliance GG-100 heat gun impresses with its powerful performance, adjustable settings, ergonomic design, and durability. Whether for professional or personal projects, it stands out as an essential tool that enhances efficiency and precision in heat-related tasks.
Top Page Image Contents