INTRODUCTION

Thank you for purchasing a Master-Bilt cabinet. This manual contains important instructions for installing, using and servicing a Master-Bilt TAF ERC2 case. A parts list is included in with this manual. Read all these documents carefully before installing or servicing your equipment.

STORE CONDITIONS

The Master-Bilt TAF ERC2 cases are designed to operate in the controlled environment of an air-conditioned store. The store temperature should be at or below 75°F and a relative humidity of 55% or less. At higher temperature or humidity conditions, the performance of these cases may be affected and the capacity diminished. It is not uncommon in a newly constructed store for the temperature and humidity to be above design conditions. These excessive conditions may produce sweating in the case until the store is operational and the ambient environment is more desirable.

The Master-Bilt TAF ERC2 should not be positioned where it is directly exposed to rays of sun or near a direct source of radiant heat or airflow. This will adversely affect the case and will result in poor performance.

If this case is to be located against a wall there should be at least 6” space between the wall and the back of the case (see page 7). This space will allow for the circulation of air behind the case, which will prevent condensation on the exterior surfaces.

NOTICE

Read this manual before installing your cabinet. Keep the manual and refer to it before doing any service on the equipment. Failure to do so could result in personal injury or damage to the cabinet.

DANGER

Improper or faulty hook-up of electrical components of the refrigeration units can result in severe injury or death.

All electrical wiring hook-ups must be done in accordance with all applicable local, regional or national standards.

NOTICE

Installation and service of the refrigeration and electrical components of the cabinet must be performed by a refrigeration mechanic and/or a licensed electrician.

The portions of this manual covering refrigeration and electrical components contain technical instructions intended only for persons qualified to perform refrigeration and electrical work.

This manual cannot cover every installation, use or service situation. If you need additional information, call or write us:

Customer Service Department

Master-Bilt Products

Highway 15 North

New Albany, MS 38652

Phone (800) 684-8988

Fax (800) 684-8988

4

Page 3 Page 5
Page 4
Image 4
Master Bilt TAF-27 ERC2, TAF-48 ERC2, TAF-74 ERC2 manual Introduction, Store Conditions
Page 3 Page 5

TAF-74 ERC2, TAF-27 ERC2, TAF-48 ERC2 specifications

The Master Bilt TAF series, which includes models TAF-48 ERC2, TAF-27 ERC2, and TAF-74 ERC2, represents a substantial advancement in refrigeration technology, specifically designed for food service and commercial kitchens. Each model in this series has been engineered to meet diverse cooling requirements while ensuring energy efficiency and reliability.

The TAF-48 ERC2 is a robust unit with a 48-inch width, making it an ideal choice for establishments that require ample refrigeration space without sacrificing energy efficiency. This model features a digital temperature control system, allowing for precise monitoring and adjustments of internal temperatures. Its front-breathing design enables it to be used in confined spaces, optimizing workflow in busy kitchens. The TAF-48 ERC2 is equipped with LED interior lighting, enhancing visibility for quick access to stored items, and comes with adjustable shelves to accommodate various sizes of products.

In contrast, the TAF-27 ERC2 offers a more compact solution for locations with limited space. With a 27-inch width, it is perfect for smaller kitchens or front-of-house applications. Despite its size, the TAF-27 ERC2 is built with the same quality components as the larger models. This unit also includes a digital control system for easy temperature management and energy-efficiency features that contribute to lower operational costs.

The TAF-74 ERC2 stands out with its impressive 74-inch width, tailored for high-volume operations. It features a powerful compressor and advanced refrigeration technology that ensures fast and consistent cooling, critical for busy environments. This model is particularly suited for establishments like buffets or catering services, where large quantities of food need to be quickly accessed and maintained at safe temperatures.

All models in the Master Bilt TAF series incorporate environmentally friendly refrigerants, reflecting a commitment to sustainability. They are designed for easy cleaning with rounded corners and removable shelves, making maintenance straightforward. Each model boasts a durable construction, ensuring longevity even in the most demanding kitchen settings.

In summary, Master Bilt's TAF-48 ERC2, TAF-27 ERC2, and TAF-74 ERC2 deliver exceptional reliability, energy efficiency, and user-friendly features, making them ideal choices for a variety of commercial refrigeration needs. Each unit is crafted to provide optimal performance while prioritizing ease of use and sustainable practices.
Top Page Image Contents