Nozzle |
|
(150,000 BTU/Hr Model) | Combustion |
1. Remove upper shell (see | Chamber |
page 10). |
|
2.Remove fan (see page 19).
3.Remove spark plug wire
| from spark plug. |
| Spark Plug |
4. | Remove spark plug from | Burner Head | Wire |
| burner head using 13/16" |
|
|
|
|
| |
5. | Loosen flare nut using |
|
|
| 3/4" |
|
|
| Push fuel tube down. |
|
|
6. | Remove air line hose from | Screw |
|
| burner head. | Spark | |
|
| ||
7. | Remove three screws |
| |
| Plug | ||
| using 5/16" |
|
|
| remove burner head from |
|
|
| combustion chamber. | Air Line Hose |
|
8. | Place burner head into vise | Flare Nut |
|
|
| ||
| and lightly tighten. | Fuel Tube |
|
9. | Carefully remove nozzle |
| |
|
| ||
| from burner head using |
|
|
| 5/8" socket wrench (see |
|
|
| Figure 30). | Figure 29 - Removing Burner Head, 150,000 BTU/Hr Model |
10.Blow compressed air through face of nozzle. This will free any dirt in nozzle area.
11.Inspect nozzle seal for
damage. |
|
|
12. Replace nozzle into burner | Nozzle |
|
head and tighten firmly | Face | Nozzle |
| ||
| Seal | |
12.4 |
|
|
13. Attach burner head to |
| Nozzle |
combustion chamber. |
| |
|
|
14.Install spark plug in burner head.
15.Attach spark plug wire to
spark plug. |
| |
16. Attach fuel tube and airline |
| |
hose to burner head. | Burner | |
Attach flare nut until nut | ||
Head | ||
seats against fuel tube and |
| |
fitting. Tighten 1/4 turn |
| |
more using 3/4" |
| |
wrench |
| |
| ||
17. Replace fan (see page 19). | Figure 30 - Removing Nozzle, 150,000 BTU/Hr Model | |
18. Replace fan guard and | ||
| ||
upper shell. |
|
17
100743