Initial Settings

In this menu system, there are several ways to cus- tomize the settings provided. Most menus consist of three levels to set up the options, but some require greater depth for the variety of settings.

General Operation

1.Press SETUP and the Setup menu appears.

2.Use v / V to select the desired option.

3.While the desired item is selected, press B to move to the second level.

4.Use v / V to select the second desired option.

5.Press B to move to the third level.

6.Use v / V to select the desired setting then press ENTER to confirm your selection.

Some items require additional steps.

7.Press SETUP to exit the Setup menu.

Note:

Press b to go back to the previous level.

General Settings

Tuning Band Select

1.Select the [Tuning Band] option then press B .

2.Use v / V to select the tuning band (TV or CATV) option then press ENTER.

TV: If you are using a standard antenna to receive channels.

CATV: If you are using basic cable to receive channels.

Auto Channel Set

Connect the Recorder to the desired type of antenna or cable TV system as shown on page 15.

This Recorder is equipped with a frequency synthe- sized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14- 69 and CATV channels 1-125.

1.Select the [Tuning Band] option.

2.Use B / v / V to select [START] icon.

3.Press ENTER to begin the channel search. The tuner will automatically cycle through all available channels in the area and place them in the tuner’s memory.

Note:

After the Auto Channel Set proceeding is complete, make sure the Tuning Band is set appropriately (TV or CATV) on tuning band, follow steps 1~2 as shown previous (Tuning Band Select) to choose the correct Tuning Band (TV or CATV).

To Add or Erase Channels from Memory

This feature allows you to add to or erase channels from memory manually.

1.Select the [CH. Add/Del] option.

2.Press B to move to the third level. [Edit] icon is highlighted.

3.Press ENTER and the Channel Edit menu appears.

4.Use v / V or number buttons to select a channel to add or delete then press B.

[Add] or [Delete] icon is highlighted.

5.Press ENTER to confirm your setting.

6.Repeat steps 4-5 to add or erase additional channels.

7.Press RETURN (O) to exit the menu.

18

Page 18
Image 18
Maxell ZRY-316 manual Initial Settings, General Operation, General Settings